Create an account Home  ·  ·  Forums  ·  ·  Articles  ·  ·  Downloads  ·  ·  Photo Gallery  
Login
Nickname

Password

Don't have an account yet? You can create one here.

Navigation
· Home
· Article Archive
· Article Submit
· Downloads
· FAQ
· Forums
· Members List
· Photo Gallery
· Private Messages
· Web Links
· Your Account

Search Articles



Forums

Wiper motor...which is the correct one?
Lead additive, one more question.
M31C mount with or without replica weapon
Backfire and Hesitation
Wanted: Steering column and shaft for M38-1952, or late CJ2A
2024 CT. MILITARY VEHICLE SHOW AND FLEA MARKET- JUNE 15,2024
Brake Line
How to link full size photos in posts
Clutch release bearing support cast tab for return spring
T90 case replacement required?

Willys M Jeeps Forums


willysmjeeps.com :: View topic - Fuel Pump rebulding
 Forum FAQForum FAQ   SearchSearch   UsergroupsUsergroups   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Fuel Pump rebulding
Goto page 1, 2  Next
 
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Technical Knowledge Base
View previous topic :: View next topic  
Author Message
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Sat May 30, 2015 8:16 pm    Post subject: Fuel Pump rebulding Reply with quote

Has anyone rebuilt an AC 4260 which has a primer lever and replace the middle body with a body without the primer lever like my photos show.

I want to order a rebuild kit, but I don't know what the AC pump number is for the duel action pump used on the M38




_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Sat May 30, 2015 11:46 pm    Post subject: Reply with quote

The original M38 pumps (AC #'s) were:

1539917 - After eng serial 74419

1539585 - Eng serials up thru 74419

The service replacements for these were:

5592659 - Eng serials after 74419

5592147 - Eng serials up thru 74419

M38A1 pumps in order of appearance:

1539810

5594069

5594260

All you need to do is build the pump either way using the parts list in the two ORD 9's to make sure you use the right parts with the pump you are building.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
OKCM38CDN
Member


Joined: Feb 17, 2012
Posts: 530
Location: Del City, OK

PostPosted: Sun May 31, 2015 6:21 am    Post subject: Reply with quote

If I remember correctly - you can contact "Then And Now" and they can tell you how to identify the body and then they can get you the correct rebuild kit fir it... That was what I did years ago...

There is a number 4 digit stamped into the body along one of the edges that tells them which kit to use...

Hope this helps...
_________________
Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 201001205
Tornado Alley
Del City, OK
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Sun May 31, 2015 8:53 am    Post subject: Reply with quote

Ken,

As you can see from my pump list you have the last M38A1 pump I listed PN 5594260 . As I have already said above you will need to use all the pump parts required for one of the four M38 pumps I listed and just order a kit for the last two M38 pumps. Or use the number off the mounting flange on your new center body.

Then & Now will assume you want a kit for whatever number you give them.

Do you have the fuel pump parts list breakdowns from both the M38 and M38A1 ORD 9's? If not download the two ORD 9's from our downloads page and print out pages:

M38 ORD 9 pages: 60, 70, 71, 72, & 73.

M38A1 ORD 9 pages: 64, 65, 66, 67, 80, 81, 82, 83, & 84.

Then select parts to match the pump with your middle body.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Sun May 31, 2015 1:33 pm    Post subject: Reply with quote

A little more info:
The problem with the new center body is, that there is not a number stamped on the flange.
The box that it was packed in has a Part No. 1143735, and it came from
27 Central Ordnance Depot, London. Ontario.
The date on the box is 5-68

I got it off ebay thinking I could just swapped it out with the center body of the 4260 M38A1 pump and end up with a pump replica of a M38 pump.

Hoping the top and bottom sections of the 4260 were compatible as a what would be in a M38 pump.

I don't want it to seem like I am over explaining myself, but I probably am, so please over look that.

And so as you see I'm trying to convert the M38A1 pump to a M38 pump.
However I didn't know which kit number to order. Even if it is possible to make the conversion with the pieces I have here.

But I believe with the info you gave I should hopefully be able to now. Hopefully a big word.

Thanks Wes for the pump numbers associated with the M38 pumps.
To clear one thing up that you wrote,

" just order a kit for the last two M38 pumps"
I'm taking it you mean, to order only one kit not two kits.
A kit for either the 5592659 pump or the 5592147 pump. please concur.

I may have the pump break downs somewhere in the shop. But I think it might be easier to download another copy.

Thanks
ken
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Sun May 31, 2015 9:31 pm    Post subject: Reply with quote

Yes, I meant a single kit for either of those late service replacement pump part numbers.

I couldn't find that 1143735 part number in any of my manuals.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Mon Jun 01, 2015 6:50 am    Post subject: Reply with quote

Ok, thanks

I have had this part for a few years now meaning to convert this pump. I found it sort of odd that this body be drilled and tapped for a vent fitting, would be made in 1968 and work with the M38 pump. But maybe it was really made for some other later model pumps?
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Mon Jun 01, 2015 9:49 am    Post subject: Reply with quote

I just looked at the larger file of your first photo and see where you got that part number from. It is part of the complete NSN (National Stock Number or also called NATO Stock Number). Our system does not break the full NSN down on part's tags like the Canadians did. In that NSN on your box the breakdown is:

2910 = Federal Stock Class

Country of Origin: 00, 01 would be US made, 21 = Canada

NIIN = National Identification Item Number = 1143735

The 1143735 is used to find the item in the supply system. The supply clerks will have a cross ref manual that will give them the actual manufacturer's part number for that NIIN.

Usually doing a google search using the NSN will get you a few hits but with small parts for carbs and fuel pumps you very rarely get any hits. These parts, when surplussed out,were quickly gobbled up by rebuilders to keep their shelves fully stocked. Therefore very few web sites list any info on their NSN's.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Mon Jun 01, 2015 2:24 pm    Post subject: Reply with quote

I am surprised you were able to see all that from the box. Here is the close up of the box tag and the cover tag that was with it. Appreciate the help. I'm going to try my luck on rebuild and converting it. Oh, by the way the body already had valve and seals in it. But I don't know how good the seals would at their age.
Also I found these numbers inside casting, 5590450





_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Mon Jun 01, 2015 8:41 pm    Post subject: Reply with quote

It would have been nice if they had at least ink stamped the machined part number on the housing.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Tue Jun 02, 2015 9:51 am    Post subject: Reply with quote

I didn't know if they would be any additional help, Since they have the same prefix as the numbers 5592659 and 5592147.
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
BCA
Member


Joined: Jul 02, 2011
Posts: 134
Location: Milton, Ontario

PostPosted: Wed Jun 03, 2015 9:13 am    Post subject: Reply with quote

Details for the parts numbers on the Canadian packaged items are:
2910-701-6403: (easy to check in ORD9 for m38 or m38A1) 1538355.
2910-21-114-3735 = 5592293, WO 118474, body assy, fuel section, w/oil seal.
Many parts shown in the American Ord 7, 8 and 9 parts books were not issued a G#, usually because they were low-demand or non-serviced items. This caused a problem when the switch to Nato Stock Numbers occurred because the NSN usually used the last 7 digits of the "G" number. Therefore the Canadian parts books generated a NSN for these parts, using the "21" Canadian country code. This allowed for all Canadian inventory to be identified by a NSN.


Last edited by BCA on Thu Jun 04, 2015 9:36 am; edited 1 time in total
Back to top
View user's profile Send private message
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16225
Location: Wisconsin

PostPosted: Wed Jun 03, 2015 9:26 pm    Post subject: Reply with quote

Brian,

Just a couple of little things here. The number listed in the US ORD 9 for the 1538355 is not the NSN 2910-00-701-6403 but is actually the older FSN 2910-701-6403.

The correct WO # for the 5592293 is 118474. The "for service use" part which would normally replace 5592293 is 5592953 and the WO # for it is 120005.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
BCA
Member


Joined: Jul 02, 2011
Posts: 134
Location: Milton, Ontario

PostPosted: Thu Jun 04, 2015 9:37 am    Post subject: Reply with quote

Thanks Wes: corrections made.
Back to top
View user's profile Send private message
Cacti_Ken
Member


Joined: Apr 20, 2005
Posts: 1021
Location: Silsbee, Texas

PostPosted: Fri Jun 05, 2015 1:43 pm    Post subject: Reply with quote

Then and now told me they didn't have info on these numbers 5592695 and 5592147.
I gave this number 1539917, and the lady I was talking with said it sounded more familiar. She gave me a price and for me to send a photo of the diaphragm pull rods for correct diaphragms to send in the kit.

She emailed this photo of kit to compare if it would work with mine.
To me it looks like it will. The only difference is, that there is only one pulsator diaphragm in the kit.

She will have to change the vacuum diaphragm to one with the same pull rod as I have removed from the pump.

My question here is, will this one diaphragm replace the three original pulsator diaphragms removed from the pump?
Is the diaphragm in the kit made of modern material for today's gasoline and only one is needed for replacing the three?




_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Technical Knowledge Base All times are GMT - 6 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001 phpBB Group
Forums ©

 



PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.