Create an account Home  ·  ·  Forums  ·  ·  Articles  ·  ·  Downloads  ·  ·  Photo Gallery  
Login
Nickname

Password

Don't have an account yet? You can create one here.

Navigation
· Home
· Article Archive
· Article Submit
· Downloads
· FAQ
· Forums
· Members List
· Photo Gallery
· Private Messages
· Web Links
· Your Account

Search Articles



Forums

What is painted black on a M38A1?
MB cylinder head ‘42-‘44 casting 660C
Fuel primer
M-38 / M-38A1 Vent Lines Made to Order...
PTO Wood Ruff key size
M38 Sector Shaft Diameter
M38 Bell Crank Bolt Tourqe
wtb speedometer
M38A1 - Gap between frame and bottom of firewall
Windshield Bolts

Willys M Jeeps Forums


willysmjeeps.com :: View topic - Drilled shank bolts for slotted nuts - cotter pins
 Forum FAQForum FAQ   SearchSearch   UsergroupsUsergroups   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Drilled shank bolts for slotted nuts - cotter pins

 
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> M100 & other 1/4 T trailers
View previous topic :: View next topic  
Author Message
RonD2
Member


Joined: Oct 02, 2014
Posts: 767
Location: South Carolina, Dorchester County

PostPosted: Mon Jan 30, 2017 1:08 pm    Post subject: Drilled shank bolts for slotted nuts - cotter pins Reply with quote

Having a time finding drilled shank bolts for the M100 support leg and draw bars. Two 1/2-20NFx1-3/4 and four 7/16-20NFx1. Strange, but there seems to be plenty of fine thread slotted nuts available but no bolts? No hits with the usual suppliers or NOS available either. Searched the topic on this site stem to stern with no joy. I'm guessing everybody is making their own?

http://www.mtfca.com/discus/messages/257047/319041.html?1351279141

http://www.mtfca.com/discus/messages/257047/291846.html?1338043969

Advice always appreciated!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 14972
Location: Wisconsin

PostPosted: Mon Jan 30, 2017 2:30 pm    Post subject: Reply with quote

AN 8-15 would give you a 1/2-20NF x 1 23/32" drilled for a cotter pin.
AN 7-7 would give you a 7/16-20NF x 31/32" drilled for a cotter pin.

These are the closest in length. Adding or subtracting a dash # will give you + or - 1/32" length.


Heads-up RonD your email system is bouncing the automated emails from our web site that let you know you had a reply to one of your posts. You can try adding our web sites admin email address to your contact list.
www-data@willysmjeeps.com
admin@willysmjeeps.com
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
RonD2
Member


Joined: Oct 02, 2014
Posts: 767
Location: South Carolina, Dorchester County

PostPosted: Mon Jan 30, 2017 8:34 pm    Post subject: Reply with quote

Very Happy Thanks Wes!

It looks like I can find stock for the AN 8-15 but no luck with the AN 7-7 so far.

I had an email address change last month and updated my profile. I added the admin email to my contact list as you suggested. Hopefully fixed the bouncing.
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

Back to top
View user's profile Send private message Send e-mail
RonD2
Member


Joined: Oct 02, 2014
Posts: 767
Location: South Carolina, Dorchester County

PostPosted: Fri Jun 23, 2017 9:08 am    Post subject: Reply with quote

Just to close the loop, I ended up drilling my own using the guidance from the Model T folks at:

http://www.mtfca.com/discus/messages/257047/319041.html?1351279141

http://www.mtfca.com/discus/messages/257047/291846.html?1338043969

They turned out pretty good if I do say so myself!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> M100 & other 1/4 T trailers All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001 phpBB Group
Forums ©

 



PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.