Create an account Home  ·  ·  Forums  ·  ·  Articles  ·  ·  Downloads  ·  ·  Photo Gallery  
Login
Nickname

Password

Don't have an account yet? You can create one here.

Navigation
· Home
· Article Archive
· Article Submit
· Downloads
· FAQ
· Forums
· Members List
· Photo Gallery
· Private Messages
· Web Links
· Your Account

Search Articles



Forums

Wiper motor...which is the correct one?
Lead additive, one more question.
M31C mount with or without replica weapon
Backfire and Hesitation
Wanted: Steering column and shaft for M38-1952, or late CJ2A
2024 CT. MILITARY VEHICLE SHOW AND FLEA MARKET- JUNE 15,2024
Brake Line
How to link full size photos in posts
Clutch release bearing support cast tab for return spring
T90 case replacement required?

Willys M Jeeps Forums


willysmjeeps.com :: View topic - Horn switch adapter
 Forum FAQForum FAQ   SearchSearch   UsergroupsUsergroups   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Horn switch adapter

 
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Technical Knowledge Base
View previous topic :: View next topic  
Author Message
4x4M38
Member


Joined: May 30, 2014
Posts: 3440
Location: Texas Hill Country

PostPosted: Sun Nov 12, 2017 9:03 pm    Post subject: Horn switch adapter Reply with quote

The tube is not connected to the horn switch
adapter in the steering box I disassembled.
The bottom of the tube is flared.

In the Ord 9 G758 it shows the tube as a separate
piece, guide tube.

All of the replacement horn switch adapters I've
seen are all one piece.

Which is correct?

Thanks,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16227
Location: Wisconsin

PostPosted: Sun Nov 12, 2017 10:39 pm    Post subject: Reply with quote

Picture is worth a thousand words. Post a PIC or two of what you are looking at so we can see the same thing. ID the PN of the steering box you are working on. Or at least post the casting number on the box.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
G740
Member


Joined: Jan 27, 2006
Posts: 498

PostPosted: Mon Nov 13, 2017 6:30 am    Post subject: Reply with quote

The original adapters were constructed with a flared tube end that crimped it into the threaded adapter. Lousy design actually. They did not seal tight and allowed the gear oil to get into the switch which it was actually built to do. The ones we make are a one piece design so that the tube cannot leak oil into the switch. The photos in the ORD 9 show some individual pieces that were actually assemblies. Take the worm on the end of the shaft. They do not come apart, yet they are shown as separate pieces in the book.
John
Back to top
View user's profile Send private message
4x4M38
Member


Joined: May 30, 2014
Posts: 3440
Location: Texas Hill Country

PostPosted: Mon Nov 13, 2017 7:44 am    Post subject: Reply with quote

Good morning John,
Yes the piece remaining in the adapter is slightly loose, but looks
like it was crimped or flared at the bottom.

I'm a little confused. Was the switch designed to get oil into it? That's
what I'm reading from your post.

Save buying a new adapter with tube, is there a fix? Is it terminal to
run it with the tube loose or removed entirely?

Yes, the Ord 9 G758 in this example as well as the G740 shows individual parts that were included in assemblies in the delivered vehicles. Good point.
That tab on the spare carrier comes to mind.

Thanks,
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail
G740
Member


Joined: Jan 27, 2006
Posts: 498

PostPosted: Mon Nov 13, 2017 6:22 pm    Post subject: Reply with quote

The switch was not designed to have oil get to it. Hence the crimped tube and that goes up above the oil level. You can try to solder the tube to the disc in the center. I have done this but not very successfully.
John
Back to top
View user's profile Send private message
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16227
Location: Wisconsin

PostPosted: Mon Nov 13, 2017 6:56 pm    Post subject: Reply with quote

Brian, Those photos would make all of this simpler.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
4x4M38
Member


Joined: May 30, 2014
Posts: 3440
Location: Texas Hill Country

PostPosted: Mon Nov 13, 2017 10:25 pm    Post subject: Reply with quote

Hello Wes,
My camera is full and I need to dump it before I can take any more photos.

But I will and post.

John, I don't see a disc. The tube is flared at the bottom. The adapter has
a loose bit that looks like the same material as the tube. It appears
to be crimped at the top and bottom of the adapter.

I can see where the flared portion of the tube may have been soldered to the
top crimped part. It would make more sense if the whole tube had a flare that sat on top of the adapter and the rest went on through and was crimped at the bottom. It just looks like two pieces. Could it have been twisted in two?

I'll get a couple of pics.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail
4x4M38
Member


Joined: May 30, 2014
Posts: 3440
Location: Texas Hill Country

PostPosted: Thu Nov 16, 2017 12:11 pm    Post subject: Reply with quote

Here is tube, oil seal, steering gear (horn adapter)
RG-078053-9-1/4
WO-809078
7696370



http://willysmjeeps.com/v2/modules/gallery/albums/album372/Horn_adapter_tube.jpg

Plug, expansion, oil seal tube (steering gear) (horn adapter)
RG-402129



http://willysmjeeps.com/v2/modules/gallery/albums/album372/Horn_switch_adapter.jpg

It appears the tube may have been attached to the bit still in the plug (adapter) and broke off somehow. In the Ord 9 G758 image of the parts the tube appears flared at the bottom like a trumpet. It would make sense to me that it was swaged at the bottom below the trumpet area, which would allow one to flare and peen the lower portion, sort of sealing it to the plug or adapter.

However, the fact that there is a rubber seal at the top of the switch assembly makes me think the designers did not rely on the tube, oil seal, to keep oil out of the switch, and that it was basically a guide for the horn rod. The portion still in the plug or adapter is slightly loose and can be rotated. Whether it got that way through age and abuse is a possibility, but maybe it was never meant to be liquid tight. It just does not seem to be robust enough an assembly to stand much moving around, especially during maintenance. I'd certainly entertain thoughts on either side.


And horn switch , assy 8329689



http://willysmjeeps.com/v2/modules/gallery/albums/album372/Horn_Switch_1.jpg



http://willysmjeeps.com/v2/modules/gallery/albums/album372/Horn_Switch_2.jpg

The horn switch did not work. I figured it was a good time to see what fails in these things. During disassembly, similar to removing the bezels on gauges, the plastic like material holding the pins and what was crimped into the switch housing fell apart. Not micarta, I can't remember the name.
It did not look cracked, but probably was. Or I broke it. Just mild corrosion on the inside of the switch. Everything still moved up and down.

There is a rubber seal that seals the shaft of the button and has a flat portion sitting on top of the assembly that seals the flat portion to the wall of the the plug (adapter). There was no oil below the seal.

The switch failed because the electrical connections were tarnished (not rusty, but just enough darkening of the metals to prevent contact).
In the last photo you can see the disc and one of the two pins that make contact that I burnished with some 400 grit. The pins would have been connected to the wiring harness.

Sadly, other than the material holding the pins being cracked, the only thing wrong with the switch was tarnishing of the pins. And no way to clean them up without taking it apart.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail
wesk
Site Administrator
Site Administrator


Joined: Apr 04, 2005
Posts: 16227
Location: Wisconsin

PostPosted: Thu Nov 16, 2017 1:10 pm    Post subject: Reply with quote

The crumbled black disc is most likely BakeLite.
https://en.wikipedia.org/wiki/Bakelite
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail Visit poster's website
4x4M38
Member


Joined: May 30, 2014
Posts: 3440
Location: Texas Hill Country

PostPosted: Thu Nov 16, 2017 4:41 pm    Post subject: Reply with quote

Yes Wes, that is what it is. Thanks!

I've seen plenty of it just could not remember the name.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    willysmjeeps.com Forum Index -> Technical Knowledge Base All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001 phpBB Group
Forums ©

 



PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.