Joined: Oct 31, 2016 Posts: 126 Location: Houston, Texas
Posted: Wed Nov 27, 2019 10:42 am Post subject: Camshaft Fibre Gear Puller
Help!
I need to pull the Fiber Camshaft gear off my L-134 block. I have no less than 6 pullers but the fiber gear is tricky. It appears I need a 2 jaw/arm puller where the two claws point outward.
Does anyone know a good source for a puller that will work properly ?
Trip _________________ Trip
Houston TX
51 M38 MC 25423
52 M38
M38 recently acquired Some parts only, roller
67 CJ5
51 CJ3A
49 CJ2A
Many auto parts stores will loan them with a deposit.
My fiber gear pulled so easy that when it came off I thought I could've done it by hand. (Should've checked before mounting the puller --- it might have)
Good luck! _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
I NEVER try to pull a fiber gear; they are hard to remove and I am afraid they will break. And if it is already damaged, bust it off. Otherwise, leave it on. _________________ M38 23100 June 51
M38 34523 Sep 51
M606/CJ3B 1964 Kaiser 57348 118458
M37B1 1963
Willys MB 1944
Ford GPW 1942
Dodge WC63 1943
Dodge Power Wagon WM300 1967
Plymouth Barracuda, 1973, 340 4 barrel
All ground up restored by me.
Lots of others.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum