Don, Yes "No Cigar" your pin is installed backwards. You have several choices:
1-Leave it like it is and each time you need to remove the pin you will first have to remove the bumperette.
2-Drill a hole in the bumperette aligned with the pin head and large enough to slip the pin through.
3-Re-assemble all of it correctly and enjoy the simple life down the road. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
To continue my education, why was a clip pin used to secure the rings rather than something more permanent? Were the rings regularly removed? Why would I at times need to remove the rings? _________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Could be several reasons, like they get bent or they need to be removed so something else could be attached. Even if one were to not use a large clevis pin with a quick release pin one would use common industry sense and install a bolt so the head could be slid out after the nut is undone without creating a need for major surgery. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Posted: Thu May 05, 2022 7:02 am Post subject: Headlights
Two years ago I took apart the headlight assemblies. Time to reattach.
Here are some of my pics. Hope someone may find them useful.
Also plenty of great diagrams & hardware info in the TM’s & albums.
_________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Reinstalling the glass was a PITA. Some shops will only use their own new glass. One guy said he could probably do it but was pessimistic about the results. Finally called Jerry, my mechanic friend. Took a few false starts and about two hours. I brought the paracord and helped keep stuff from slipping back out. Turned out fine. Did the bottom seal today at the barn and zipped it up.
_________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Joined: Oct 02, 2014 Posts: 2000 Location: South Carolina, Dorchester County
Posted: Fri May 13, 2022 9:53 pm Post subject:
Hi Don,
Looks great!
Maybe it's my imagination or just the angle of the photo, but it looks to me like your driver-side lower door curtain retainer bracket is either upside down or maybe reversed with the passenger-side bracket?
Mine don't sit that high on the body. Pretty sure there's illustrations in the manuals. _________________ Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51
“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari
I worked on the seats over a year ago using old take off springs and synthetic 'horse hair', looking for a real war jeep ride.
Today I installed the back seat and climbed in... having never sat in a war jeep. OMG. You must actually climb in and climb out. The back seat was ... hmm... interesting. Did GI's really ride back there for miles & miles?
Ouch.
_________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Joined: Jul 18, 2008 Posts: 643 Location: Melrose, MA and Santa Fe, NM
Posted: Tue May 17, 2022 6:29 am Post subject:
Riding in a jeep, regardless of the seat and comfort, far beats out humping 60-80 #s of kit and crap on your standard issue legs and feet..... _________________ North Shore, MA
Santa Fe, NM
1942 GPW
1952 M38
1964 Apollo 5000 GT
“ far beats out humping 60-80 #s of kit and crap on your standard issue legs and feet.....”. Whydahdvr
My Dad, a WW2 vet, once told me he saw a GI drop dead on a long march.
He also had stories of deadly military vehicle accidents. With zero safety gear, the old jeeps are just a little less dangerous than a motorcycle. _________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Thanks for the encouragement JeepDrivingRay... something we all need.
As an enlightened ‘Son of the South’, I will offer a thought that brother Bubba will support .. most all folks can eat a 20 lb. Dixie Queen watermelon, but it must be done one bite at a time and not in one sitting.
Don _________________ Don Alvarez
Retired HS Teacher
Central Florida
M38 Project
Last edited by Naugha on Tue May 17, 2022 7:25 pm; edited 1 time in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum