Posted: Mon Apr 24, 2017 11:39 am Post subject: install question on hood welting
I'm attaching the new hood welting on my M38 radiator guard. The welting was pretty much missing when I got the jeep so I have nothing to go by. I have a few questions:
1. Is there a specific way that the split leg rivets are installed? I was just going to use a flat bladed screwdriver to bend the legs over.
2. Were the rivet legs flattened down to hold the welting tight or just installed loosely?
3. There are about four 2 inch long spots along the top of the radiator guard where it looks like there was some kind of double sided tape or sealant applied, is this correct? I don't see any mention of this in ORD 9.
Joined: Mar 13, 2006 Posts: 1079 Location: Richburg, SC
Posted: Mon Apr 24, 2017 5:47 pm Post subject:
1.You can buy a tool to install the rivets or make your own. I made one a few years ago by milling 2 - 3/16" grooves in a piece of 1/4" thick x 3/4" wide flat stock. I cut it approx. 1" long. Then I tack welded this piece to the lower jaw of a pair of vice grips. You will also need either a piece of brass or plastic to protect the head of the rivet.
2.Squeeze the jaws and the rivet is properly rounded over to the grill flange. I have seen where others start splitting the rivet with a screwdriver, but I didn't have to do that.
3.I haven't seen double sided tape or sealant used. The welting is asphalt coated - maybe that is what you are seeing?
I am at the point of installing new welting on my new Jeep now. The problem is - I removed the piece from the vice grips and have misplaced it. I guess I will have to make a new one for this job too! _________________ Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum