Posted: Tue Nov 14, 2006 8:51 pm Post subject: split rivet
I need ten split rivets, black finish, at least 5/8" long, 5/16" head, 1/8" or 9/64" shaft. The ones I have in the kit are too short to rivet the grill insulator strap at the head light hole since there is an 1/8" thick reinforcement strap tacked inside the frame.
I can only find some locally that are nickle plated plus the head is smaller. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
Ok, cancel my request. I was able to get the short ones to work although I had my doubts at first. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum