View previous topic :: View next topic |
Author |
Message |
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Sun Jul 02, 2017 2:33 pm Post subject: Horn Rod Guide Tube - Steering Box |
|
|
I am rebuilding my early style M38 ROSS steering box. It was a disaster, having obviously spent some time sitting full of water. I have replaced all the ware parts, but I rescued the horn rod guide tube. I am in assembly mode now and noticed a small approx. 1/16" hole in guide tube, 2" from the top end of the tube.
This small hole might be the result of rust, as there is a lot of pitting in the area. I could fill it with a dab of epoxy, but want to know if it is necessary or not.... having a hole there doesn't make sense to me, but I will ask the experts, just in case!
Thanks for the help
Photos follow:
Jeff _________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida
Last edited by Jeff_Lee on Mon Jul 03, 2017 1:24 pm; edited 1 time in total |
|
Back to top |
|
|
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Sun Jul 02, 2017 2:37 pm Post subject: |
|
|
Here is a closer photo - PHOTOBUCKET IS A MESS TODAY slow, slow, slow! Anybody else experiencing problems?
See next post for picture
ANY ADVICE on this?????
thanks Jeff _________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida
Last edited by Jeff_Lee on Mon Jul 03, 2017 1:25 pm; edited 1 time in total |
|
Back to top |
|
|
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Sun Jul 02, 2017 3:15 pm Post subject: |
|
|
hopefully this is the right photo....
_________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida |
|
Back to top |
|
|
BCA Member
Joined: Jul 02, 2011 Posts: 134 Location: Milton, Ontario
|
Posted: Mon Jul 03, 2017 1:59 pm Post subject: |
|
|
One of the purposes of this tube, aside from guiding the horn rod towards the center of the horn switch, is to prevent gear oil from draining out of the box when the horn switch is removed for replacement or servicing. I doubt if the gear oil level will reach as high as the pinhole in the tube. ... Brian |
|
Back to top |
|
|
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Mon Jul 03, 2017 2:05 pm Post subject: |
|
|
Thanks Brian. I agree with your logic and think it is a rust pin hole.
I am going to epoxy it closed if I don't hear differently in the next 24 hours...
Perhaps one of our fellow forum members might have one sitting on their bench where they can confirm the tube should be WITHOUT a hole??
Best, Jeff _________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida |
|
Back to top |
|
|
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Mon Jul 03, 2017 2:21 pm Post subject: |
|
|
Hey Brian (or some other MJeeper)
My tube is quite loose fitting in the bottom fitting that press fits into the bottom of the steering box. I can spin it freely and jiggle the tube in the fitting. I don't think it will stop oil in it's current state, which will in-turn fill the switch up.
A little off topic, but are these tubes swage fit into the bottom adapter? Perhaps I can re-swage it to achieve a tighter fit? _________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16262 Location: Wisconsin
|
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Tue Jul 04, 2017 7:35 am Post subject: |
|
|
It's a rust hole - in the boxes I've rebuilt (CJ2A, M38, M38A1) the tubes did not have any holes. _________________ 1951 M38 |
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Tue Jul 04, 2017 10:04 am Post subject: |
|
|
Jeff_Lee Photobucket isn't allowing sharing of photos anymore unless you pay a fee - formerly this was a free service. I've been a member of this website for 10 years and now all the photos I've published are now gone from the website. Bummer! _________________ 1951 M38 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16262 Location: Wisconsin
|
|
Back to top |
|
|
Jeff_Lee Member
Joined: Jan 27, 2014 Posts: 151 Location: West Palm Beach FL area
|
Posted: Tue Jul 04, 2017 2:22 pm Post subject: |
|
|
Thanks Gentlemen.
I am now resolved that my adapter and horn tube assembly is toast. My horn switch was full of both oil and water, so it has been leaking for a while. I am going to try to replace it, as I think fixing it carries the risk of early failure.
I see Midwest Military has a replacement adapter/tube assembly available. It states it is made by them. Anybody have any experience with this solution?
Happy Independence Day!
And Wes, I was certainly referring to PHOTOBUCKET, and I believe Skyjeep was, as well.
Jeff _________________ 1951 M38 restoration project - Flightline Jeep MC 23923 DoD 6-51
1954 M-100 Trailer USMC Dunbar Kapple s/n M-750759 DoD 1-54
1947 Willys CJ2A - Harvest Green
1954 Ford F-100 Parts chaser - blueprinted Y-Block
Southeast Florida |
|
Back to top |
|
|
skyjeep50 Member
Joined: Feb 20, 2007 Posts: 606 Location: Illinois
|
Posted: Wed Jul 05, 2017 7:40 am Post subject: |
|
|
Wes - To publish a photo here it has to be linked to a photo-sharing website. Photobucket is now a pay-to-share site. The links to my pics are gone. Of course I can subscribe but it rankles me that the change was made without notice. I believe Google offers free photo sharing. _________________ 1951 M38 |
|
Back to top |
|
|
wesk Site Administrator
Joined: Apr 04, 2005 Posts: 16262 Location: Wisconsin
|
|
Back to top |
|
|
|