Posted: Fri Feb 09, 2018 7:20 am Post subject: WTB part of M38A1 Frame, passenger side
Looks like PO had overloads that were too long on the rear of my '53 M38A1. A piece of the frame surrounding the passenger rear shock mount was torn out (they put a 8 inch piece of angle iron on the outside of the frame and welded a bolt to the top for the shock mount
If anyone has an otherwise unusable frame that they would be willing to cut a piece out from passenger rear spring forward mount to the first cross member (to the rear)...............I really need it! want to restore this portion of the frame!
This is going to be a difficult restore but I believe it can be done if I can cut in the upper portion of the replacement frame.
I will be checking this board.......likely daily
Dennis, The frame I have is in good shape. It is in Texas. Let me know if you have any interest and I’ll see if it is still on the trailer. Mike 254-913-1176
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
