Ahh, The "Rubber Bushing" part threw me off but "Silent Block" does show up there. You want the Bearing, silent block.
This is the page with Z's part numbers.
If you will take the old Federal Stock Number (FSN) 3120-769-7597 and convert it to the later National (Nato) Stock Number by adding two 00's 3120-00-769-7597 then google that and you will get over
About 99 results (0.40 seconds)
. Then visit the first few sites and Voila!
SKU: 3120007697597 | Model: 7697597
Specifications from the Manufacturer
Overall Length: 1.9900 inches minimum and 2.0100 inches maximum Body Outside Diameter: 0.7800 inches minimum and 0.7850 inches maximum Body Inside Diameter: 0.4470 inches minimum and 0.4530 inches maximum Flange Outside Diameter: 0.8780 inches minimum and 0.8830 inches maximum Flange Width: 1.7400 inches minimum and 1.7600 inches maximum End To Flange Distance: 0.0940 inches minimum and 0.1560 inches maximum Corner Shape: Square inside right corner Corner Shape: Square right flange outside left corner Left End Body Diameter: Any acceptable Right End Body Diameter: Any acceptable Material: Rubber intermediate layer Material: Steel outside diameter surface of flange Style Designator: 21c solid, external flange Style Designator: Solid, external flange
And you will even find a few for sale there as well! _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You mentioned a NAPA # at the beginning. I forgot to address that. The reason there's no NAPA listing for the CJ's is because they use a greasable 9/16-18 bolt without the metal/rubber bushing/bearing and the M38 uses a non-greasable 7/16-20 bolt with the silent metal/rubber bushing/bearing.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum