Camshaft Fibre Gear Puller

[Trip]

Help!

I need to pull the Fiber Camshaft gear off my L-134 block. I have no less than 6 pullers but the fiber gear is tricky. It appears I need a 2 jaw/arm puller where the two claws point outward.

Does anyone know a good source for a puller that will work properly ?

Trip
_________________
Trip
Houston TX
51 M38 MC 25423
52 M38
M38 recently acquired Some parts only, roller
67 CJ5
51 CJ3A
49 CJ2A

[RonD2]

Hi Trip,
I used one of these:

https://www.otctools.com/products/multipurpose-bearing-pulley-puller-set

Many auto parts stores will loan them with a deposit.

My fiber gear pulled so easy that when it came off I thought I could've done it by hand. (Should've checked before mounting the puller --- it might have)

Good luck!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

[Trip]

Thank you. Funny thing, one of the listed suppliers in my area is a company I worked for 30 years ago!

Thanks again,

Trip
_________________
Trip
Houston TX
51 M38 MC 25423
52 M38
M38 recently acquired Some parts only, roller
67 CJ5
51 CJ3A
49 CJ2A

[dpcd67]

I NEVER try to pull a fiber gear; they are hard to remove and I am afraid they will break. And if it is already damaged, bust it off. Otherwise, leave it on.
_________________
M38 23100 June 51
M38 34523 Sep 51
M606/CJ3B 1964 Kaiser 57348 118458
M37B1 1963
Willys MB 1944
Ford GPW 1942
Dodge WC63 1943
Dodge Power Wagon WM300 1967
Plymouth Barracuda, 1973, 340 4 barrel
All ground up restored by me.
Lots of others.