Joined: Feb 17, 2012 Posts: 411 Location: Del City, OK
Posted: Mon Mar 23, 2020 8:13 am Post subject: Quarantine Benefit - Work on the M-38A1
Well, with the shelter in place order out here in Oklahoma. I have taken to renew the restoration of my '54 M-38A1. It has been sitting in my garage over the winter and not much progress was made. I am doing the body work and do not like to weld in my garage (I push it outside into the driveway to weld and grind, Safety First).
I fired up the compressor and sandblasted some parts, earlier this week and got them painted before the rains came back. So I decided to take the dash panel off and clean it up and get it ready to go... I can do that easily without pushing the jeep outside (Spring here in OK, means rain so need to leave the jeep inside so the bare panels do not rust).
Placed an order with MWM for parts I need to do the dash, that should be completed in a couple of weeks, by then the weather should settle down and maybe I can get the body work started again...
So what are you folks doing on your jeeps during this time of social distancing???
Good time to work on projects...
Photos will follow, just do not have any right now... _________________ Hal, KB1ZQ
TSGT, USAF (Ret)
1952 M-38 CDN CAR 52-31313
1952 M-100 Strick #104
1951 Willys Wagon (For Sale)
1954 Willys M38A1 (Restoration In Progress)
Del City, OK
Joined: Oct 10, 2007 Posts: 39 Location: Cranston, Rhode Island
Posted: Mon Mar 23, 2020 5:15 pm Post subject:
Exactly the same thing maybe a little more. Finishing brakes, bearings etc all around. Nose off, sandblasting, rebuilt water pump, radiator, fuel/vacuum pump and carb. More of a Dissertation will
Follow when I download pics. Struggle is, now everyone wants to hang around while I work on it. Needless to say, I have a few friends who are none to happy with me for locking them and everyone else out. Stay safe.
Joined: Dec 10, 2017 Posts: 175 Location: Southern Maryland
Posted: Tue Mar 24, 2020 8:50 pm Post subject:
I'm spending lots of time in the shop working on my frame up restoration of my '53 A1 Fire Brush truck. I have the chassis rolling and the engine together and painted...put the flywheel, clutch and bell housing on today. The trans, transfer case and PTO are done and waiting to be reunited with the engine. Hopefully in the next day or so...and then put the entire package back in the chassis.
Mike B _________________ Mike B
1953 M38A1 Brush Truck
1951 M100 Trailer
Joined: Jul 10, 2018 Posts: 81 Location: Western Washington
Posted: Thu Mar 26, 2020 11:09 am Post subject:
I flushed the brake system on my 1951 M38. Next I installed a weld-on cage nut and a capture nut. Then started on the hat channel removal. All in between trying to work. I cant be expected to be as productive since my office is now at home and in the woods! lol _________________ Rick Eades
1951 M38 & 1967 M715
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum