Hey, how come that illustration shows three holes in the pivot casting for the landing leg? Any Cdn trailers I have ever seen only had two holes. Are the US trailers different, or does the manual show a MBT part?
Last edited by cmpman on Sat Jan 06, 2007 3:57 am; edited 1 time in total
That manual and the 1972 version of that manual and the 1950 version of the maintenance manual for the M100 all show the MBT photo but it is well known that the M100 only gets two holes. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Posted: Sat Jan 06, 2007 7:55 am Post subject: RE: M100 pivot leg
FWIW my 5/52 M100 has two position holes; up & down. Interesting coincidence, both my M38 & M100 are dated 5/52 on the plates. M100 still has original unit marking though there is some repaint "around" the markings.
Thanks Wes, with the repro pivot it is 15 degrees to the rear, so I will need to see about drilling it out in the correct location and filling the other holes in... (it has hole for a MBT, so one of those will get filled and the original down hole...)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum