TM9-8015-1 Clarification

[cobra5]

I have an engine with an oil pump that was installed 180 out by the previous owner during rebuild. Finally getting around to correcting this problem. On page 117, step g. of the manual, it states to coat the threads of the cap screws with plastic type sealant. What type of sealant are they describing? The only thread sealant I know is the type that one uses on bolts that go into a blocks water jacket. Is this what I'm suppose to use or is there some other type?
_________________
1951 M37 WOW, 1953 M37 WOW, 1954 M37 WOW, 1953 M38-A1, 1954 M38-A1, 1964 M151-A1, 1967 M151-A1, 1968 M151-A1, 1978 M151-A2, 1989 M35A2C, 1965 M416, 1966 M416, 1967 M416
MSgt, USAF Retired 1/84-10/05

[wesk]

Yes. Silicon sealants or gasket sealer will work.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[cobra5]

Thanks for the clarification Wes
_________________
1951 M37 WOW, 1953 M37 WOW, 1954 M37 WOW, 1953 M38-A1, 1954 M38-A1, 1964 M151-A1, 1967 M151-A1, 1968 M151-A1, 1978 M151-A2, 1989 M35A2C, 1965 M416, 1966 M416, 1967 M416
MSgt, USAF Retired 1/84-10/05