Cross Member Radiator Tabs

Farmerjohn · Posted: Sun Apr 28, 2024 2:46 pm Post subject: Cross Member Radiator Tabs

A long stalled restoration is starting to get momentum. When I left off on the project, I had replaced the front cross member, which had been replaced buy the previous owner with a piece of angle iron. My replacement cross member though, which I didn't realize at the time, is missing the radiator tabs.
Is any one aware of source for replacement radiator tabs? I have found a replacement for the entire cross member with the tabs included but I would prefer not to cut out the cross member again.
I am not opposed to fabricating the two tabs from flat stock but I would like to save the time of doing so. As I understand, from a previous post, the two tabs are of different lengths.
Thank you for any suggestions.
John

RonD2 · Posted: Sun Apr 28, 2024 4:53 pm Post subject:

Hi John,
I don't recall ever seeing those mounting tabs for sale.

Suggest calling John at MidWestMilitary.
If anybody makes them, has stock, or knows who does, it would be him.

I'd be glad to measure mine if you need dimensions (including photo to show orientation).

If it helps the search, they're listed in the September 1955 ORD9 on page 273 (the cross member assembly is listed on page 274) as:

Bracket, Radiator Support (Left) ORD 8677338, WO-801285
Bracket, Radiator Support (Right) ORD 8677339, WO-801286

The listing seems to indicate that the Army kept supply stock on hand, meaning maybe some survived to the market today as NOS.

Good luck!
_________________
Ron D.
1951 M38 Unknown Serial Number
1951 M100 Dunbar Kapple 01169903 dod 5-51

“The only good sports car that America ever made was the Jeep."
--- Enzo Ferrari

wesk · Posted: Sun Apr 28, 2024 8:43 pm Post subject:

Hi John. Since this is a single technical inquiry I have moved it to the technical Board. You are welcome to start a Project thread over on the project board where general progression notes and discussions can be carried on. The technical board is the correct place and quickest place to answers to direct technical questions and it is the place where many members come to to learn more about the technical side of their jeeps.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

Farmerjohn · Posted: Mon Apr 29, 2024 11:43 am Post subject:

Ron,

Thank you for your suggestion, I will follow up with John.

You reference ORD9. If there a manual available for the M38 with this type of technical information?

My best, John R.

RonD2 · Posted: Mon Apr 29, 2024 11:49 am Post subject:

RICKG · Member Joined: Aug 31, 2010 Posts: 1741 Location: SO IDAHO

John, there are plenty of dead frames out there. Put a note in the want to buy in hopes that someone would cut the tabs off a junk frame. I had a similar situation with my 3A and had tabs within a week. I'll wager the tabs for the 3A bot mt rad are same as M38 as well.
_________________
keep 'em rollin'
RICKG MC 51986 DOD 01-52, '50 CJ3a

wesk · Posted: Tue Apr 30, 2024 9:27 pm Post subject:

This illustration might help the process:

You can view full size here: http://willysmjeeps.com/v2/modules/gallery/albums/album228/CJ2A_vs_CJ3A_vs_M38_frame_sm_001.jpg
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.