Some free parts after restoration

[Cacti_Ken]

I can deliver to Little Rock to save on shipping. But otherwise if you want any of it you pay for the shipping of coarse.
I hate to throw stuff away but it's all used, yet usable.
If no takers, I'll take the good metal stuff to the scrape metal yard along with some other iron and metal I need to get rid of.

Four used original M38 brake drums. Run out. Replaced with new repos.
Two used M38 black out marker lights with doors and gaskets. Disassembled. Internals good, need new wire and painting.
Used M38 speedometer cable and housing. Has a small wear thru on rubber sleeve where it rubbed on metal near T/C end.
Brake and Clutch pedal. blasted primed and painted. has usual wear holes
where shoe/boot meets pedal.
Clutch pedal linkage shaft. the one that goes between the frame and transmission.
Brake pedal arm.
Brake/clutch pedal shaft bracket. Cast metal. Bushings worn but not bad.
Brake and clutch pedal arm shaft. Has some wear on the brake arm end.
Home shop made Master cylinder heat shield.
This is all I can think of now.
_________________
Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM

[OKCM38CDN]

Ken,

Are your blackout lights for the front and have the proper connections for Douglas connectors... Or are they the ones with the rubber connector on the back of the lamp...

I am interested if the previous...

Thanks...