M38/M38A1 top bow measurements

[4x4M38]

http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=11482&highlight=top+bow+rod

Short bow goes to the front. Center of common bolt hole at bottom to horizontal rod hole at top.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

[kenperkins]

my bows are in the down position on the jeep. hooking a tape on the end of the short bow, it measures 25 1/2 to a 3/8 hole. I have a NOS short bow for a spare and when I lay it down and measure to the 3/8 hole it's 25 3/4h.
I think I would put the top on and lay the rod in the sleeve it lives in and check the measurement that way...be sure the top is warm and tight.
_________________
'51 M38 #22936,
'51 M100 Dunbar
#01164782
'53 M100 Dunbar
M416b1
2- M762
MVPA #11788
MVCC LIFER

[4x4M38]

That’s good advice. Your measurements are within reason.
I was measuring from the center of each hole.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

[wesk]

Those 5 photos I started this post with have vanished along with the online photo storage site I had them on back in 2008.

Any chance anyone here downloaded my 5 photos and still have them and remember where they are? Perhaps you could post them again here?
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php