Joined: Dec 22, 2007 Posts: 8 Location: RAPID CITY, SD
Posted: Sun Aug 03, 2008 4:35 pm Post subject: M38 is missing
I have a 1952 M38; I have been troubleshoot chasing using TM-8012, and OS9-72 manuels.
The trouble is; it idles great but when there is a load placed on the engine (a hill) it begins to miss and loose power, then smooths out again without load. Civilian plugs wires are intact, Autolight plugs are good, new points properly gapped, coil is 2 years old. I have replaced the condenser three times; each time it appears to take of the symptoms but they return.
I have kitted the carb seems to be working great. I am leaning toward a defective coil. Any input would be greatly appreciated!
Posted: Mon Aug 04, 2008 6:49 pm Post subject: missing
You have a plug wire breaking down or a cracked dist-cap .the fire to the plug is sparking till it gets under aload ,and its drowning out the plug from the rich mixture it needs to power up the hill .
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum