The Bantam T3 and later M100 lunette and casting will work. The MBT & T3 had the smaller necked down lunette ring diameter (thickness) and a three hole pivot casting so you had three leg positions (full down, half down & full up). The M100 has a ring diameter that is the same as the shaft diameter and only two holes in pivot casting for full up or full down leg. The M416 casting will not work because the tariler frame is wider and the "V" of the drawbar is not the same angle as the MBT/T3/M100. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum