Joined: Jun 07, 2010 Posts: 16 Location: Albuquerque NM
Posted: Mon Jan 17, 2011 12:36 pm Post subject: Steering Box Swapout?
Bubba had a "custom dashboard" on my 53 M38A1 when I got it. In order to make it work, he cut about 6" out of the jacket tube and shaft and welded it back together.
As a result, when I installed the original dash, the wheel rubbed against my thighs and made clutching/Braking interesting.
So off comes the steering box with shaft and all. The inside of the original box was filled with bearing/axle grease YUCK!
I have a steering box with an un-cut shaft/jacket tube from either a CJ2 or CJ3.
Will the older unit work until I find a replacement shaft/jacket for my M38A1?
I want to use the complete unit from the older Willy's until I rebuild my original. I can not swap parts as the shaft is shorter inside the box on the CJ2/3.
The 3A unit will fit. The ratio is different. Only a serious issue if operating on the highway at speeds over 45. John at Midwest Military has Army surplus overhauled M38A1 steering gear assemblies. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum