Posted: Sat Apr 16, 2005 2:51 pm Post subject: Engine pops (slight backfire) M38
This is happens while slowing down with engine. Like going down hill and letting the engine slow you down. Is this caused by the timing being off? I never noticed it until I adjusted the timing. Thought I got it right but it was very hard to see on the early style engine. Is there a trick to seeing staight on to see the timing mark on the early style engines?
Thanks, Gerry 51 M38
Gerry,
Retarded timing will cause the backfire. Too rich a mixture will cause the backfire. The two combined, IE your mixture was too rich but your timing was advanced a little far then you retard the timing where it's suppose to and suddenly you now notice the carb is running too rich. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Wes, I will double check the timing. There is no way of adjusting the carb is there ? It was rebuilt last spring by a very reputable person. Wes is there any trick at looking in to see the timing marks better on the early style engine, Thanks, _________________ Gerry 51 M38
Just clean the area real well and mark the firing mark (5 deg) with a dayglow orange or green paint. Then draw a bisecting line across the window and paint it dayglow orange or green.
It depends on what he used for a kit or parts. On the metering rod side a wrong spring, wrong rod or bad (NOS 40 years old) diaphram can disrupt or corrupt the mixture system. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Wes I marked it but I find it hard to get a staight on view. I did it from underneath with someone else turning the distributor. I thought if I did it from above the angle would make my timing marks be off.
Petesilfven, Thanks for the input but I have a new exaust system and it appears to not have any leaks. _________________ Gerry 51 M38
Joined: Apr 04, 2005 Posts: 219 Location: Monticello, NY
Posted: Mon Apr 18, 2005 7:08 pm Post subject:
Hi,
I use a 6"x6" mirror to view the early timing hole. It takes a little practice to get the light and the mirror in the correct place but when you do there is a good view.
Bob W _________________ Bob W. Monticello, NY. 1952 CJ3A, 1952 M38, 1950 CJV-35/U
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum