Joined: Apr 03, 2005 Posts: 271 Location: Chester County, PA
Posted: Sun Mar 19, 2006 12:55 pm Post subject: M38A1 Steering Column Jacket
Hi All,
It may be a dumb question, but I'm trying to get my floorboards all squared away. Theres one area that puzzles me. I ordered from George @ AJP the half moon steering colmn jacket plates under the assumption that I needed them.
Looking at SNL G758, page 314, I see the floorboard setup diagram. However, I dont see the half moon plates. Were the half moon plates used on a certain production run? I have the upper floorboard of course, + the plate labeled "U" # WO-685679. It says that this plate superseces another, but I cant find what that plate looked like.
If I am only supposed to have 685679 -- how does the gasket get anchored down?
Btw, there are no holes in Plate U that will accept a half moon plate. However on the floorboard, there are holes that will accept the lower plate. _________________ Bob Collins
1954 M38A1 MD79056
Joined: Apr 03, 2005 Posts: 271 Location: Chester County, PA
Posted: Sun Mar 19, 2006 1:12 pm Post subject:
That's what I thought Hal. But now the question is how does the gasket around there get anchored down? Or with the plate configuration I have, is it not required? _________________ Bob Collins
1954 M38A1 MD79056
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum