M38 Steering rebuild kit?

[ECVJeeps]

Does anyone sell a good rebuild kit for the M38?

I see that Kaiser Willys list one, however I have read some rather questionable post about the quality of their parts.

http://www.kaiserwillys.com/category/willys-jeep-steering-gear-box-repair-parts-accessories/2

Can anyone weigh in on this with first hand knowledge about the fit of their parts kit?

Pat
_________________
1952 M38CDN (in progress)
1942 GPW 51859(in waiting)
M100 CDN #0548(in progress)
M100 CDN #0281

[Oldsalt]

I can't say about Kaiser's kit but I bought one from Walcks a couple of years ago and the ball bearing for the bottom of the worm shaft was very rough. In fact the race for that bearing did not even have a rounded track for the little balls. I wound up using the old bearing which was much smoother. The rest of the kit was fine.

[ECVJeeps]

Thanks for the heads up, I will have to phone Walcks to see if they have addressed the bearing issue.
_________________
1952 M38CDN (in progress)
1942 GPW 51859(in waiting)
M100 CDN #0548(in progress)
M100 CDN #0281