Throw out bearing carrier

[bl5211a]

Hello: i noticed the replacement throwout release bearing carrier has its spring eye location about 1" forward of original.
Is this an issue?
Will it cause spring to fail due to over stretching?
My original carrier has some wear from fork.

Brian 1955 m170
_________________
Brian
1955 M170
1940 BSA M20

[CapnDan]

Did you go ahead and install it? See my recent post: http://willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=13659&start=0&postdays=0&postorder=asc&highlight=
_________________
Danny L. Harris
aka Bubba
1954 M38A1

[CapnDan]

FYI, my photo album is on page 23 of the members albums, if you want to a larger image.
_________________
Danny L. Harris
aka Bubba
1954 M38A1

[4x4M38]

Hi Danny,
I never got a response.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

[wesk]

I'd stick with original clutch sleeve and spring. If you elect to use a different sleeve then make sure you have the vendor advise you of what model it is for and if he has the correct spring for that model.

As for knowing what is correct simply look at the illustration in the M38A1 TM 9-8014 page 232 figure 122.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php