M38A1 Body Panels

[Austringer]

Have a M38A1 body that I'm going to cut up. Are there any panels that someone needs? Only cost is what I costs for me to pay my assistant to cut them off 20-30 each depending on how complex the part is.

Let me know what you need.

Jason

[wesk]

Shipping would be an issue for some folks but they need to know where you are located?
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

[BobW]

Jason,

Do you have the bolted on floor panel in this photo below? (thanks for the photo Wes) If so let me know, I need one.

Thanks,
Bob
52cj3a@gmail.com


_________________
Bob W. Monticello, NY. 1952 CJ3A, 1952 M38, 1950 CJV-35/U

[Bolerpuller]

I'm looking for both back corners, and supports (wheel wells are fine) If you still have some I'm interested.
Thanks!

[QCIM38A1]

I need the two lower front sides, near the floor. Also the rocker panels

[DMCarpenter]

If the dash panel is in good shape (bolt on, full width, left to right, do not need glove door or instrument panel, I could use it.

Where are you located?

Thank you
_________________
Dave/David

1953 M-38A1 USAF-USMC
1943 GPW
1945 WC-52