Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
Posted: Sat Aug 23, 2014 3:27 pm Post subject: Emergency Brake Cable
I ordered an Emergency Brake Cable from Midwest Military.
Very nice piece, especially compared to the takeoff.
The experts will have to weigh in as to accuracy but if the takeoff is original, John appears to be right on.
It would be very nice to see a photo of the two laid out straight side by side and a closeup of each of the ends compared flat and side by side. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
Posted: Sat Aug 23, 2014 9:54 pm Post subject:
I can do that Wes, although Bubba fried the brake drum end on the take off.
I have no idea what happened to it, but he had the wire just wrapped around the yoke.
Your photos help a bit but still lack any detailed length comparison or any real close detail of the actual look of the housing (sheath) ends and cable ends.
Joined: May 30, 2014 Posts: 3459 Location: Texas Hill Country
Posted: Mon Aug 25, 2014 8:54 am Post subject:
Hi Wes,
I can get the U clamp off but probably not the yoke.
It looks like the threaded end went the way of the dodo bird, then Bubba stuck what was left through the end of a makeshift yoke, then crimped a cable terminal to the end of it.
The sheath has also been damaged/cut off on one end.
The cable itself may be close, but I'll have to see if I can straighten it on the yoke end. I have no idea how they got the threaded end off.
That's ok. If she is butchered that far it would not make a good comparison to a new one for determining the accuracy of the new one. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum