points/condenser parts number help

PaulB · Member Joined: Jul 15, 2006 Posts: 78 Location: Kentucky

Hi folks, I am looking for the current part numbers (at Napa/O'Reilly/etc.) for points and condenser for my '51 M38. It is the original 24volt system. I can't seem to find an old post with this information.

Thanks for the help...
_________________
Paul
April 1951 M38

http://www.willysmjeeps.com/v2/modules.php?set_albumName=PaulB&op=modload&name=gallery&file=index&include=view_album.php

buzzk · Posted: Mon Dec 29, 2014 10:44 am Post subject: points

points m38 NAPA , PI-CS25A, PIHD-CS725A COND. AL869, ROTOR AL69 THESE ARE ALL NAPA PART # BUZZZ

WESTCOMVIC · Posted: Mon Dec 29, 2014 11:10 am Post subject: Points and condensor question

Are these Napa parts # applicable for a 53 M38A1?
_________________
1953 M38A1...CFR 53-32475
1953 M-100..CFR 53-70201

wesk · Posted: Mon Dec 29, 2014 12:38 pm Post subject:

A lot of the cross reference data will show all internal parts the same between MB, M38, M38A1/M170 but that is not entirely true. Safe bet is to just use your M38 or M38A1 ORD 9 parts manual (download it free here on our "Downloads" page) and research your distributor parts starting with the correct auto-lite or delco part number.

The three Auto-Lite distributors used in the M38/M38A1/M170 from 1950 thru 1971 are much the same except for advance curves (springs & weights) and the first distributor used an external noise filter (capacitor) mounted on the firewall and had a different conduit connection at the distributor.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

buzzk · Posted: Mon Dec 29, 2014 3:34 pm Post subject: points

according to Dennis Spence they are all the same MB-M38A1

wesk · Posted: Mon Dec 29, 2014 3:39 pm Post subject:

I have used Dennis Spence's 1980 guide for years but if you do your homework you will find the errors.

If the book wasn't copyrighted I would posts scans of all the pages in mine with their updates and corrections. Wink

_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

PaulB · Member Joined: Jul 15, 2006 Posts: 78 Location: Kentucky

Thanks guys for replays. I'll get them ordered today!
_________________
Paul
April 1951 M38

http://www.willysmjeeps.com/v2/modules.php?set_albumName=PaulB&op=modload&name=gallery&file=index&include=view_album.php

PaulB · Member Joined: Jul 15, 2006 Posts: 78 Location: Kentucky

Buzz shot you a PM, just wanted to make sure you got it.

Also I picked up the AL69 and they are the wrong rotors, see link below.

http://www.napaonline.com/Catalog/CatalogItemDetail.aspx/Distributor-Rotor/_/R-ECHAL69_0460149665

What is the number for the correct one?

Thanks again for the assistance!
_________________
Paul
April 1951 M38

http://www.willysmjeeps.com/v2/modules.php?set_albumName=PaulB&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.