The main issue is the inaccurate TM's. The TM 9-8014 has a very poor illustration on page 187 and a set of instructions page 189 Items (6) & (7). Here they omit two regular thin 7/16 washers listed in the M38A1 ORD 9 SNL G-758 parts manual. If you go to the parts manual page 132 or view it below you will see two different bolts (one superseded the other, but either will work) 2 ea and then 2 ea of the following Lock washer, Light series (Thin standard outside diameter) 7/16 ID washer, large outside diameter 7/16 ID washer and nuts.
Also I am using the M38's TM 9-8012 illustration which is a much better illustration.
Thanks,
I do have the thin washers. Is there a trick to getting them into position? Can't seem to slip generator on with all 4 washers?
Brian _________________ Brian
1955 M170
1940 BSA M20
Not really. It helps to have an extra set of hands and a drift pin. These 24 V generators are just too heavy for one person to do it all. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum