M38 crossover dimensions

4x4M38 · Posted: Sun Apr 19, 2015 6:33 am Post subject: M38 crossover dimensions

Wes,
You posted a photo of an M38 crossover tube with dimensions.

I can't seem to find it anywhere.

Can you find it for me?
Thanks!
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

wesk · Posted: Sun Apr 19, 2015 8:51 am Post subject:

I do not recall posting one with dimensions on it. I have searched my on line albums and my PC files and I have not found any.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Sun Apr 19, 2015 11:13 am Post subject:

I did the same. I think it was a photo from Aforests yellow crossover tube he had to get help in bending to fit.

I know I've seen it here somewhere but I'll be darned if I can find it.

Very rudimentary stuff. All approximate. Total length, length of larger end, distance from end to valve connection, distance to mounting arm, etc.

Oh well. My fault for not book,marking the thing.

Thanks Wes.
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Sun Apr 19, 2015 11:35 am Post subject:

It was a post from Owen and the thing was orange.........
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Sun Apr 19, 2015 1:36 pm Post subject:

AHA!

http://www.willysmjeeps.com/v2/modules.php?name=Forums&file=viewtopic&t=7149&highlight=l134++f134
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php

wesk · Posted: Sun Apr 19, 2015 3:23 pm Post subject:

Yep, it wasn't me it was Capescw.
_________________
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100

Mjeeps photo album: http://www.willysmjeeps.com/v2/modules.php?set_albumName=Wes-Knettle&op=modload&name=gallery&file=index&include=view_album.php

4x4M38 · Posted: Wed Apr 22, 2015 9:36 am Post subject:

Can someone confirm a couple of threads for me please?

On the M38 crossover tube there is a nut welded on the back side for the carburetor vent line. It has internal pipe threads for the tubing fitting connection. 1/4 or 1/8" NPT?

On the bottom of the tube there is a fitting threaded and soldered into the tube with an L-shaped piece of tubing which sticks into the center of the tube.
Is that 1/8 or 1/4 NPT? The photo below appears to show the threaded portion is smaller in diameter than the 1/4" NPT nipple soldered into the tube for the control valve.

Thanks,
Brian
_________________
Brian
1950 M38
MC11481
http://www.willysmjeeps.com/v2/modules.php?set_albumName=album372&op=modload&name=gallery&file=index&include=view_album.php


Create an account	Home · · Forums · · Articles · · Downloads · · Photo Gallery


PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.