Posted: Thu Aug 24, 2006 10:52 pm Post subject: Tool Box lid catch
What do the parts/ components look like for the tool box lid catch. I don't know what I am missing to fix it. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
I believe the parts on the door are the Ring WO# 674956 ORD# 7375351, Washer ORD# 120393, washer WO# 674993 and Pin, cotter ORD# 119117. The catch which I believe is the striker on the box frame is WO# 674957 ORD# 7375169. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
My tool box lid has the boss still on it. I need the little guy that looks like 1/4 inch rod bent into a 90 degree that fits thru the boss and also the washers and ring which attach to it.
The box frame has a ring on top of it. Inside the box frame there is what is left of a piece that hangs down. I am not sure if it has rusted off some.
Can you tell?
That is the catch for the latch. when you put the lid down you turn the handle and the "L" shaped latch turns to catch that ledge. _________________ Ryan Miller
MVPA # 22010
Thanks Ryan, I thought I was going have to do something about that plate in the photo. I didn't know if was rusted off or what. _________________ Tropical Veteran
35th Inf. Reg. "CACTI" 4th I.D. VN
Amateur Radio K5XOM
The striker I believe is a part of the box assembly since it is welded in place. The catch would be, I assume, the part on top of the box used to provide a means to pad lock the lid closed. _________________ Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum