Cacti Ken 
transpixel
transpixel July 2003
M38 before Restore
http://www.geocities.com/kls235
for restoration process transpixel
transpixel
transpixel
transpixel Oil Purge transpixel
transpixel
transpixel
transpixel Getting Ready to install Engine and transmission. May 9, 2006.
Tie rod assembly unpainted & temporarily installed.  
Don't pay any attention to the pair of legs on the right!!
transpixel
transpixel
transpixel
transpixel May 13, 2006, Primed carburetor. Engaged starter. Engine made about three revolutions and started. I don't know if the gauge is accurate or not but it does respond. Idles at 30psi. transpixel
transpixel
July 2003
M38 before Restore
http://www.geocities.com/kls235
for restoration process
Viewed: 660 times.
Oil Purge
Viewed: 419 times.
Getting Ready to install Engine and transmission. May 9, 2006.
Tie rod assembly unpainted & temporarily installed.
Don't pay any attention to the pair of legs on the right!!
Viewed: 670 times.
May 13, 2006, Primed carburetor. Engaged starter. Engine made about three revolutions and started. I don't know if the gauge is accurate or not but it does respond. Idles at 30psi.
Viewed: 611 times.
transpixel
transpixel Temperature  gauge transpixel
transpixel
transpixel
transpixel A Temporary mechanical pressure guage. The pressure is 40psi estimate about 800rpm transpixel
transpixel
transpixel
transpixel May 17, 2006 Testing Generator and Regulator transpixel
transpixel
transpixel
transpixel Gen/Reg output status. Checked with a digital meter.
27.8 volts at fast idle
and 25 volts with engine
 at idle speed
transpixel
transpixel
Temperature gauge
Viewed: 562 times.
A Temporary mechanical pressure guage. The pressure is 40psi estimate about 800rpm
Viewed: 537 times.
May 17, 2006 Testing Generator and Regulator
Viewed: 661 times.
Gen/Reg output status. Checked with a digital meter.
27.8 volts at fast idle
and 25 volts with engine
at idle speed
Viewed: 549 times.
transpixel
transpixel I tried my hand at making one. It works very well. I added another 90 degree tube not shown in this photo for the carb vent line just like the one for the distributer vent. transpixel
transpixel
transpixel
transpixel Installing Tub transpixel
transpixel
transpixel
transpixel Modifying the axe handle bracket by making the bolts longer. transpixel
transpixel
transpixel
transpixel Modified and ready to paint. transpixel
transpixel
I tried my hand at making one. It works very well. I added another 90 degree tube not shown in this photo for the carb vent line just like the one for the distributer vent.
Viewed: 582 times.
Installing Tub
Viewed: 505 times.
Modifying the axe handle bracket by making the bolts longer.
Viewed: 483 times.
Modified and ready to paint.
Viewed: 474 times.
transpixel
transpixel 02/27/07..At this point I have installed all the electrical items and tested them. I have driven the jeep without seats down the road. I can get 50mph in a 3/4 mile strip of road. But I had to advance the timing to get it to do that. Next will be the seats, then the top. Still have to install tail gate, gas can and spare tire. Have ordered paint mask for decals. transpixel
transpixel
transpixel
transpixel 02/27/07, just another view. Waiting on paint mask s so I can paint numbers & star on the hood, then I will put it on. Also ordered the canvas seats and top works. transpixel
transpixel
transpixel
transpixel March 16, 2007. No seats installed. But had to take it for a spin around the place. transpixel
transpixel
transpixel
transpixel Have installed the seats here. Next come the windshield, then the top. transpixel
transpixel
02/27/07..At this point I have installed all the electrical items and tested them. I have driven the jeep without seats down the road. I can get 50mph in a 3/4 mile strip of road. But I had to advance the timing to get it to do that. Next will be the seats, then the top. Still have to install tail gate, gas can and spare tire. Have ordered paint mask for decals.
Viewed: 505 times.
02/27/07, just another view. Waiting on paint mask s so I can paint numbers & star on the hood, then I will put it on. Also ordered the canvas seats and top works.
Viewed: 483 times.
March 16, 2007. No seats installed. But had to take it for a spin around the place.
Viewed: 491 times.
Have installed the seats here. Next come the windshield, then the top.
Viewed: 566 times.
transpixel
transpixel Painted the Star and numbers on the hood. transpixel
transpixel
transpixel
transpixel No Caption transpixel
transpixel
transpixel
transpixel PC270009a transpixel
transpixel
transpixel
transpixel Just another view transpixel
transpixel
Painted the Star and numbers on the hood.
Viewed: 544 times.
Viewed: 535 times.
PC270009a
Viewed: 536 times.
Just another view
Viewed: 515 times.
Powered by Gallery v1.4.4-pl2