willysmjeeps.com

Hi there!
As a stop gap fix until you got lock out hubs you could remove your front drive shaft

Phil....

Very nice... well done!

Phil...

Hi there!

If you after a tip for your antenna ASAP. What you can do is what we had to do in the Australian Army as a stop gap repair for the 292 antenna mast elements. This came about after a fatal accident where whilst erecting a 292 antenna mast one of the elements pieced his eye and went into ...

I have also found it being used on modern trucks as well Being military and civilian .

Phil...

Hi there!

Well what I use to add extra security to keep my pioneer tools and other CES in its place on my M3 Stuart Tank and other vehicles... Prior to puting the staps on I secure the item with a heavey duty plastic "cable tie" or "zip tie" (that is what we call them in Australia) Tie wire can ...

Just letting you know that "DATAPLATES4U" are just about to pruduce repro data plate for the M606~M606A2~M606A3 Kiaser period Jeeps. That is the militerised CJ3B, CJ5 and CJ5 radio 24 volt.
Cost is EUR 35 each.

I am not connected with this vendor but I am getting a couple of plates off him and ...

Well here is a bargin for you guys in the UK... just spoted ity in fleabay. I just don't know if it should be listed here or in the humour section? What do you think?

Well here is the link:-

http://www.ebay.com.au/itm/Mahindra-Willys-M38a1-Jeep-/221372341723?pt=LH_DefaultDomain_3&hash ...

Well the Germans did use captured Allied vehicles. One good example was in North Africa, Romel's HQ had captured M3 half tracks and M3 Stuarts.

Phil...

That would be great thanks Rick... much appreciate.

Phil...-

Hello again.
What I am chassing picture/diamentions of the special "footman loops" used to attach the M38A1 winterizeation grill muff to the grill and the bonet/hood cover. I think qty 8 are used on the grill not sure how many ar required for the bonnet/hood.
Or better still a leed to where I may ...

Thanks guys!

Phil...

Hi guys!
Just curious about my engine in my recently aquired M38A1. Seeing it is missing its serial number off the engine. (must of been machined off when the previous had it rebuilt)

It has the following casting number:-

806279-W-12-D-AP CU (over) CR

Any idea what vintage the engine is and if ...

Thanks Wes!

Phil...

Hi there!

At what stage of production ffor the M38A1 was the brass caution plate above the gauges, to do with the bell houseing wadding plug used?

Thanks!
Phil...

I would guess to be able to padlock the the tool box closed...

Phil...