willysmjeeps.com

I had to replace the passenger side panel. I need to replace the slave bucket . does any one have the Measurment from the front of the panel and top of panel . close would be good.

M38A1 Military Fuel Pump . Rebuilt it over a year ago . been running fine . A few weeks ago it stopped pumping fuel . pulled t and disassembled it . The Fuel pump diaphragm fell out on disassembly . Check ou all parts everything look good . Reassembled the pump , and installed . Ran it for 4 days ...

yes I did clean the tapered axle area . I clean out the Key way ,threads ,and use some crocus cloth . I might have over tighten the Nut . I use the impact gun , I don't remember if I put the torque wrench on it or not . I just had assembled the rear end for a run on Sept 9, and a show on sept 11 ...

Does any one use Neversieze on there rear hubs when they install them on the tapered axles . ?

that's the same puller that I used to remove my hubs . But it didn't work ,even after heating up the hubs . I had so much pressure on them I distorted both hubs .even broke a stud on one . I've removed hubs many times before ,but never had this issue . Do I need to use Never Seize ? has anyone else ...

I had to pull my rear hubs . I went to remove the long side first, using a three foot puller . The hub would not budge . I heated it up using my torch , no go . I tried the short side ,same thing . ended up tacking the brakes apart , and removing the 6 bolts holding the backing plate ,and pulling ...

I have been using Rustoelum rusty metal primer for years . The Lowes where I lived decided ,as a test ,to stop carrying Rustoelum product and only Karylon paint . I told the manager i would not be shopping at Lowes and will go to Home Depot . I also sent an Email to Lowes head office . I got an ...