willysmjeeps.com

After rewiring My 1952 M38A1 with a new electrical harness, and having the engine rebuilt all seems well. Two lingering issues I have had and wonder if others have answers for.
Leaving my Jeep sit for a few days, it seems I have a Battery drain in the system even if the switch on the dash is off ...

Every year I go to get my jeep ready for the year, it is always dead. I usually unhook the batteries from the wires and just leave them in the jeep. Sits in a garage, non heated. Yesterday I tried to light the lights and would not even turn lights on. Starting to charge the batteries again. So do I ...

Just the cushions. My seat frames are good.

The Passenger side seat I believe is original and the driver is a newer non-regulation seat. Where is a good place to get good seats and backs for my jeeps without spending alot?

Looking for M38a1 Pushrods. Kiaser sent the wrong ones and can't reorder until Tuesday, and get them maybe three days after. So, Anyone has any they can sell?
https://i.imgur.com/PJGeq1U.jpg

The garage that rebuilt it, rebuilt it entirely. I do know that they put it together wrong for the fact it was out of time and the oil pump timing was off and a few screws were loose. I will print these replies off so that when I go out we can talk about what to do. I did order a new pushrod but ...

What do you mean wiped the lobe? And did the cylinder fail cause it was set to high?

https://i.imgur.com/5rN0TT1.jpg

Started my rebuilt engine. After 5 minutes, running started to tap. #1 cylinder push rod failed, and the top of it mushroomed. Now rocker is not making contact with it. (Pic)The #1 cylinder is on its intake stroke, going down almost at its furthest downward point and still not making contact with ...

Wiring the jeep, there are two wires that go into the steering box. There was no information on what they are actually for? Not turn signals or pressure gauges?
Looking for gromlets that go through the firewall for the wires. Anyone have them or a go place to get them>

In the last two pictures, the main switch, I looked at the kiaser willy catalog and didn't see one. Do they carry them or just not on the site? I'll call Monday but what is the tech name for it?
And it is an assembly or buy the whole thing>

I recently bought a wiring harness from Kaiser Willy's and it took about 3 months to get it. I got a call from the guy putting it in my jeep and he stated the harness has male ends that connect to the male end on the headlights. (pic 1) Is there a workaround to fix this or just connect them and ...

Put my newly rebuilt motor in. Been looking for a picture or video of where all the wires go. There are some wires I think the rebuild place threw out and not sure what I am missing.

Engine for people that DM'd me

https://imgur.com/0YbCSTd

What I meant by Better place, I was thinking someone out there may know a place cheaper than the $700 I see as the cheapest through the big guy companies. I realized maybe it is better through there cause they do know what there doing.. Dan