willysmjeeps.com

Ryan_Miller wrote:Do you have a hood number and serial number for that jeep? We are trying to track winch jeeps.

Ryan if you are looking for mine it is not an orginal winch jeep.

I sent the guy that did mine the case, the lever, and the shaft. It all worked out well.

No I just sent him the part and he made the new one.

Mine was in really tough shape and I had someone machine a new one.

Took out the protronix kit. Been running points and have had no coil issues. Now I can a little bit of a put out of the exhaust but I have not finished tuning yet.

Van wrote:What is the part number for the Napa condenser. I need a 24 volt one for my 1955 38a1

The condensor doesnt care the voltage. Go to your local parts store and ask for one for a cj3a. It is the same part

<t>I have replaced all the wire in the distributor, it is in good shape. I am not using an orginal ignition switch, I put a keyed switch in . <br/>
<br/>
I am leaning to something with the pertronix, it has given me many trouble free years but it is the only thing left<br/>
<br/>
Tonight I got home ...

Also to note jeep was running great last night, took it about 5 miles, at about mile 4 it start to cough and loose power, about 300 yards from my house I had to put it in low range to get it home. Opened the hood, tried to figure things out, jeep stalled, would not restart.

1) Pretronix is wired correctly and has been working well for years
2) All vacuum lines are hooked up as they are supposed to be

Did get the jeep to fire again last night after I found it had spark. It took a lot of cranking but finally did catch. Shut it down it wouldn't refire, gave up for the ...

It took me awhile to find all the parts to my winch setup. It started with the winch itself which was attached to a cj5, they I found a pto on craigslist, then another that came with the hanger bearing, so I sold the extra one, they I had a winch frame made. It was fun tracking down all the parts.

Good luck on finding a Gardwood level wind. I have never seen a jeep one for sale, and only seen photos of it, on one jeep.

As for the rest of the parts they do come up for sale every so often. The pillow block and be found here, it is a repop but looks the part

https://www.ebay.com/itm/Ramsey ...

Wes any time you can use better bearings the life will increase. I used a nos kit when I redid my jeep years ago. It only took about 5000 miles for it to weare out. I bet the new system lasts much longer. What is nice is no one can tell a change was made.

Same reason they are now making a tapered ...

I redid my bell crank with tapered roller bearings. A guy on the cj5 page is doing the machine work. Best upgrade ever. Took out all the slop and will last much longer.

I have extra seat spring for the front.

Wes if you find a complete Ramsey 50 setup for 2500 please forward it to me. The last Ramsey 105a pto I sold alone 5 years ago went for $1000. The hanger bearing is $700 for a repop, I have not seen an orginal for sale in years. The last time I saw just the winch itself go up for sale it sold for ...