Windshield Rubber Molding to Cowl

[Ryan_Miller]

Subject: Rubber molding screwed to the lower part of the windshield to seal against the cowl
Status: Reproduction
Sold By: Army Jeep Parts ( Manufactured jointly by AJP & MWM)

Review:

Shape/Appearance:
Black molded rubber with a reproduced company trademark "Crown" incorporated on the bottom side.

Fit/Function:
I have not mounted mine yet, but will in the next couple of months after i get the windshield painted and mounted.

Overall:
So far I think it looks good.

Rating: Will rate once I put it on and use it.

[G740]

Same seal sold by MWM. George and I own the tooling together.
John

[Ryan_Miller]

I put the rubber on my windshield and mounted the windshield on my jeep.

On the fit, the curved ends could be a little better molded to fit better and several other people have told me the same thing, but overall it fit very close.

I would say it is still a good product and the overall fit/ appearance is good.

[bubagun]

Some years ago I purchased a new repo rubber WS/cowl seal from a repuitable supplier for my M38.. It is too ...thick...well made but just has nevere fit properly. I am tired of having to abuse the latches to try and get it to latch or unlatch.

WHO... has one that is NICE...and fits properly?

[evanso1975]

John has them advertised here (about 1/2 way down the page on the left):

http://www.midwestmilitary.net/m38p11.html

I've not bought one myself, but based on the above posts, it should be pretty good.......

Wbr,
Owen.

[Cacti_Ken]

John's cowl weather strip is very good quality.