Wiring Harness installation

CJ3B · Post by **CJ3B** » Mon Feb 02, 2009 6:03 am

Hello Gents:

It's been a while (a long one) since I last posted.

I've been working on and off on the jeep, since my job, especially now that things are how they are, HAS to be major priority.

I finally got around to laying the wiring harness, rear to front. Now, what I'd like to ask is, does anyone have pics on how the wiring transition from frame to body in the front end is accomplished?

Would like to see, if possible, where does the wiring leave the frame, and where it makes contact (and how) at the body/firewall or LH (driver side) fender.

Also, if clips are required for fixing the wiring harness to the body, where can I get them? I already installed the harness to the frame with the proper clips, by the way.

I'll see if I can post some pics later on...

Any feedback will be greatly appreciated.

Best reagrds,

Jorge
San Juan, PR

ocwd · Post by **ocwd** » Mon Feb 02, 2009 2:04 pm

That's an excellent question. I've been wondering the saame thing myself. Does anyone have pictures?

CJ3B · Post by **CJ3B** » Tue Feb 03, 2009 4:33 am

Wes!

Thank you for your note. Sent you an email... sorry, I was not clear.

The wiring harness question is regarding a M38, which is the one I'm working on.

The CJ3B is running like a champ...

Thanks!

Jorge

Post by **wesk** » Tue Feb 03, 2009 1:08 pm

I have several hundred detailed photos on my photo sites.

http://willysmcelectrical.mypicgallery.com/
http://willysmc.mypicgallery.com/
http://jeep-electrical.mypicgallery.com/

CJ3B · Post by **CJ3B** » Tue Feb 03, 2009 5:17 pm

Thanks, Wes!

Now all I need is time to go over all of the pics...

Jorge