A1 hood banging noise when driving

Discussion topics on Willys Overland M series vehicles
Post Reply
User avatar
LeeG
Member
Posts: 41
Joined: Sun Jan 15, 2006 6:00 pm
Location: Lake Charles, Louisiana

A1 hood banging noise when driving

Post by LeeG »

Took my first drive on the road last weekend and it was a blast. But I kept hearing a banging noise up front and couldn't figure it out until I got back to the house.
My hood hinges don't seem to be worn but I can definitely see how driving around and hitting bumps can cause the back of the hood to make banging noises when the back of the hood has some slight up and down slack. This seems to be very painful for the hinges. Is this typical and/or is there something I can do to stop it?

Did I mention that I took my 53 A1 out for it's first drive in who knows how many years (at least 2-1/2yrs that I've been working on it)? Wahoo. What a blast it was!

Thanks,
Lee
1953 M38A1 F-Head
User avatar
GIJOE290
Jeep Enthusiast
Jeep Enthusiast
Posts: 269
Joined: Tue Apr 12, 2005 6:00 pm
Location: Altamonte Sprgs, FL 32714
Contact:

Post by GIJOE290 »

Lee, can't help with your noise question. But I can say, Congratulation's on getting running and driving it!! :D 8)
David M.
08/1953 M38A1
Serial #56535
"The Green Goat"

Restoration Begins Summer 2005! ...Er Maybe 2006? 2010? 2015? 202...?
User avatar
LeeG
Member
Posts: 41
Joined: Sun Jan 15, 2006 6:00 pm
Location: Lake Charles, Louisiana

Post by LeeG »

Banging noise solved.
My right rear corner of the hood (right side closest to firewall) was hitting the top of the fender occasionally. I thought it looked too close when I installed it but it wasn't touching. After a few road trips, when i opened the hood, I could see where it was starting to wear away my fresh OD paint. :cry: So I loosened all fender bolts and pushed it down on the firewall side about 1/8" and went for a road test. No more bang-bang. I adjusted my exhaust valves too and the motor is quiter. :D YEAH!
1953 M38A1 F-Head
User avatar
reddog
Contributor
Contributor
Posts: 58
Joined: Wed Aug 30, 2006 6:00 pm
Location: Port Coquitlam BC Canada

Post by reddog »

I did not have the retainer springs in my blackout light and it made a heck of a racket
Post Reply