Identification help for an old carb and spacer plate.

danielornat · Post by **danielornat** » Thu Apr 30, 2009 9:48 am

I have a Carter carb with YF inscribed on the front. i got it from an estate auction so i do not know what it came off of. but the real question is what the spacer plate came off of. i has FORD stamped on the botom of it and it has part number 9 58SF on it as well.
on the body of the carb it says 1630 the top says 6-724 and the mid section says L25/964S. It would greatly benefit me to know a little more about it. any help would be greatly appreciated.

Zane · Post by **Zane** » Thu Apr 30, 2009 1:03 pm

came off a ford 6 cylinder, it will not run right on an f head jeep engine due to larger jets, thats why so many jeepers have problems rebuilding them because of off the shelf generic kits that have the wrong jets

danielornat · Post by **danielornat** » Thu Apr 30, 2009 9:20 pm

so this carb came off a ford six cylinder. what years did they run them. i cannot find any info about it.

Post by **wesk** » Thu Apr 30, 2009 11:45 pm

I think 60's 223. Here's a good site:http://www.carburetor.ca/carbs/tech/Carter/Y-index.html

http://www.oldcarmanualproject.com/manu ... index.html

http://www.carburetor.ca/Tech/Carter/19 ... /index.htm