Discussion topics on Willys Overland M series vehicles
TomM
Moderator
Posts: 458 Joined: Sun Apr 17, 2005 6:00 pm
Location: Rhode Island
Post
by TomM » Mon Apr 27, 2009 1:35 pm
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Mon Apr 27, 2009 2:30 pm
Hi,
Looking better and better
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Wed Apr 29, 2009 7:09 pm
Hey North-Shore,
I have an old tub that might have those rear brackets.
That same tub still has the center part that was so rusted on yours.
If you are interested I can take some pictures of them for you.
Alan
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Thu Apr 30, 2009 3:35 am
Jeeps4Brains wrote: Hey North-Shore,
I have an old tub that might have those rear brackets.
That same tub still has the center part that was so rusted on yours.
If you are interested I can take some pictures of them for you.
Alan
Hi
Ok thanks!
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Sat May 02, 2009 2:17 pm
Here are the pictures of the center section.
Alan
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Sat May 02, 2009 5:08 pm
Hi Alan,
Are you restoring that tub??? if not do you want to sell the center piece??
thx
Eric
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Tue May 05, 2009 7:42 pm
I have no plans to fix that tub.
Let me see if I can cut out the center section and then see what kind of shape it is in.
Alan
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Wed May 06, 2009 4:11 am
Jeeps4Brains wrote: I have no plans to fix that tub.
Let me see if I can cut out the center section and then see what kind of shape it is in.
Alan
Hi Alan
If you could cut it where i did the red barre
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Thu May 07, 2009 9:25 pm
I will try to cut that part out this weekend and take pictures. Work has been busy and it won’t stop raining.
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Sun May 10, 2009 6:07 pm
See what you think about these pictures.
The blackness on the underside is from the tar undercoating. This used to be a USMC jeep.
Alan
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Mon May 11, 2009 3:32 am
Hi,
Sound good how send you a MP for more infot!
thx
Eric
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Sat May 30, 2009 1:44 pm
Hi,
Here is the piece instal
Jeeps4Brains
Contributor
Posts: 134 Joined: Thu Apr 14, 2005 6:00 pm
Location: Up State SC
Post
by Jeeps4Brains » Sat May 30, 2009 8:52 pm
Glad to see it installed. That old USMC tub has saved an old US Army tub and a Canadian Army tub. Semper Fi!
north-shore
Contributor
Posts: 146 Joined: Sun Dec 10, 2006 6:00 pm
Location: Tracadie-sheila Canada
Post
by north-shore » Sun May 31, 2009 8:25 am
Hi
Here my little boy came see is Dad wit is willy
DaveM38A1
Contributor
Posts: 99 Joined: Mon Oct 27, 2008 6:00 pm
Location: Fuquay-Varina, North Carolina
Post
by DaveM38A1 » Fri Jun 12, 2009 8:54 pm
The brackets you need are offered by Classic Enterprises out of Barron Wis.
They call them tail light panel rear body angle support $10.
http://www.classicent.com/jeep.php
I need some for my 64CJ5 tub.
Dave
1964 USMC M38A1
1953 M38A1
1964 CJ5
1968 M274 Pepe'