Discussion topics on Willys Overland M series vehicles
-
COPPER
- Member
- Posts: 20
- Joined: Mon Nov 05, 2007 6:00 pm
- Location: lakeland fla
Post
by COPPER »
my pistons on my M38 engine L-134 the piston have .040 on them would that be a indication that this engine might have been rebuild once before.
-
Zane
- Active Member
- Posts: 158
- Joined: Sat Jun 30, 2007 6:00 pm
Post
by Zane »
yes and was bored .040 oversized, good chance the crank was turned too.
-
GPA
- Active Member
- Posts: 216
- Joined: Wed Aug 06, 2008 6:00 pm
- Location: Hungary
-
Contact:
Post
by GPA »
It may have been rebuilt more than once. It is not necessary, unless it had serious damage to bore cylinders to 3rd or 4th oversize from std.
-
COPPER
- Member
- Posts: 20
- Joined: Mon Nov 05, 2007 6:00 pm
- Location: lakeland fla
Post
by COPPER »
thank you very much
