Looking for M38A1 frame specs

[tkjeeper]

Just sent the frame to be blasted, have a few brackets rotted off. I couldn't find a pdf file for the frame of my M38A1, anyone have a link that could help. I tried searching but too large parameters I guess. Thanks all

[wesk]

I don't believe we have any frame spec sheet loaded in any form. The TM 9-8015-2 covers frame and frame alignment checks with dimensions. You can download that manual on our downloads page. I also have an assortment of A1 frame photos on my photo storage site at:
http://mdframe.mypicgallery.com/
and:
http://mdrunninggear.mypicgallery.com/
and:
http://m38a1tubmounts.mypicgallery.com/

You can download the photos you need and cut out the parts you need and post them asking for the parts or measurements on the "Wanted" board.

[Zane]

ive got a couple m38a1 frames im getting ready to scrap, let me know what you need, thanks Zane

[hillbilly21]

Better Yet you can come over to my house and get a perfect M38A1 rolling chassic with a good MD engine in it ..500.00 cash !!!!!!!!!

[tkjeeper]

Better Yet you can come over to my house and get a perfect M38A1 rolling chassic with a good MD engine in it ..500.00 cash !!!!!!!!!

Now Hillbilly, thats just mean! I got mine for $500 also but with fenders, hood, grill and a couple of rotten tubs, however the chassis will need some work. Believe me if I were near you I'd be all over that! Then again, probably good for my marriage that I'm not that close. Thanks all.

[tkjeeper]

ive got a couple m38a1 frames im getting ready to scrap, let me know what you need, thanks Zane

Nice of you Zane, I'll keep that in mind. I appreciate the offer.

[hillbilly21]

YOU ONLY LIVE ONE TIME !!!!!


I AM SURE ZANE WOULD CUT UP ONE OF HIS FRAMES FOR YOU ..