Copper Vent Lines

OKCM38CDN · Post by **OKCM38CDN** » Thu Jul 22, 2010 8:53 pm

I am no longer making the vent lines...

Demand is not there and to be honest my interest is lacking...

Sorry....

Jeeps4Brains · Post by **Jeeps4Brains** » Fri Jul 23, 2010 5:06 pm

Dang! I guess I will have to make my own! I have all the fittings but no lines. Too late.

OKCM38CDN · Post by **OKCM38CDN** » Fri Jul 23, 2010 9:25 pm

You can find the 3/16" copper tubing at referigeration / air conditioning repair supply stores... the place where your AC repair guy buys his parts...

It comes in rolls of 50' and runs about $35 per roll...

Hope this helps...

Yarder · Post by **Yarder** » Mon Jul 26, 2010 11:56 pm

I just bought copper tubing at the local True Value Hardware store. Got it for about a dollar a foot, cut to size.

Picked up the brass fittings in a display at the local NAPA store. Also about $1.50 each.

I have a flaring tool, which is needed to flare out the ends. Had to remember to correctly orientate the brass fitting on the tube BEFORE I flared it out!

Cacti_Ken · Post by **Cacti_Ken** » Tue Aug 10, 2010 8:39 pm

some automotive parts stores will sell it buy the foot also.

Copper Vent Lines

Copper Vent Lines

Copper Tubing