Winch Dimensions

Post by **wesk** » Fri Nov 30, 2007 2:06 am

Hope a few of you more fortunate souls with the Ramsey 50 can help us less fortunate souls by helping me put together a good set of drawings to facilitate modifying civvy winches to fit the m38/m38A1 mount.

Would all who are willing fill in the blanks for me or just list the drawing dimension letter with what you measured.

jonesal · Post by **jonesal** » Sun Sep 26, 2010 8:15 am

Wes,

Did anyone respond to this post? Even a few of the measurements would de-mystify the process of me making one of these. If you would share what was provided to you, that would be great for the site.

Thanks,
jonesal

Post by **wesk** » Sun Sep 26, 2010 9:27 am

You can enter this link for a large copy:
http://img.mypicgallery.com/winchesptos ... 1-page.jpg

Keith Buckley supplied this original Willys blue print.

Bill_F · Post by **Bill_F** » Sun Sep 26, 2010 3:26 pm

I will see what I can do, but I am not very good at taking measurements.