Guys
Is there any way to remove the electrical portion of this from the inside of the metal body of the actual receptacle? I have a lot of gunk/corrosion on the internal circumference the metal portion which would benefit from a good clean up and paint.
It would appear to me to just push out but I am not sure and can't find any ref to disassembly in my manuals.
Regards
Nic Jackson
M38A1 24V Side Mount Slave Receptacle
-
Nic
- Contributor
- Posts: 118
- Joined: Wed Dec 02, 2009 6:00 pm
- Location: United Kingdom
- Contact:
-
wesk
- Site Administrator
- Posts: 16469
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
The disassembly of that receptacle is covered in TM 9-1825E Bendix/Eclipse Electrical Components Manual.
You can download pages 110 thru 122 on my photo storage site:
http://tm9-1825e.mypicgallery.com/
You can download pages 110 thru 122 on my photo storage site:
http://tm9-1825e.mypicgallery.com/
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
-
Nic
- Contributor
- Posts: 118
- Joined: Wed Dec 02, 2009 6:00 pm
- Location: United Kingdom
- Contact: