DOUGLASS CONNECTORS

RICKG · Post by **RICKG** » Wed Aug 10, 2011 2:49 pm

Any tips on getting the douglas connectors to go together?
It just seems like it takes an unreasonable amount of
force to get the shells to engage. I've resorted in a couple of
places to grinding the connector slightly and am using di-electric
grease. Any advice??

bubagun · Post by **bubagun** » Wed Aug 10, 2011 6:15 pm

RICKG wrote:Any tips on getting the douglas connectors to go together?
It just seems like it takes an unreasonable amount of
force to get the shells to engage. I've resorted in a couple of
places to grinding the connector slightly and am using di-electric
grease. Any advice??

Sopunds like you got a good bead on it..

sonny · Post by **sonny** » Wed Aug 10, 2011 7:29 pm

I don't know if it hurts anything or not but on my problem connectors, I put liquid soap on the rubber parts - problem solved - Sonny

MODIFIED · Post by **MODIFIED** » Thu Aug 11, 2011 8:20 am

Silicon Spray. good protection for the Rubber Grommet and wires too.

RICKG · Post by **RICKG** » Fri Aug 12, 2011 10:08 am

Silicone spray-why didn't i think of that..works good!!
Thanks for the suggestions guys..

DOUGLASS CONNECTORS

DOUGLASS CONNECTORS

Re: DOUGLASS CONNECTORS