M-38 / M-38A1 Copper Vent Lines...

OKCM38CDN · Post by **OKCM38CDN** » Sat Feb 19, 2011 7:04 am

M-38 3/16" Copper vent lines with tube nuts and loom assembled and ready to install as per the SNL G-740; consisting of 3 lines:

8676980
TUBE, IGNITOR VENT, assy (9")
8676981
TUBE, IGNITOR VENT TO WIPER, assy (27")
8676982 TUBE, gas tank vent, assy (86")

$25.00 plus $10.00 Shipping USPS Mail

M38A1 3/16" Copper vent lines with tube nuts and loom assembled and ready to install as per the SNL G758; consisting of 8 lines:

8328408
LINE, crankcase to cylinder head, assy (19 3/8 in lg)
8677619
LINE, air cleaner to elbow assy (at dash) (used on vehicles through serial No. 29295) (22 1/2 in. 1g)
8677523
LINE, carburetor ventilator, assy (9 1/16 in. lg)
8673356
LINE, distributor to air cleaner tube, assy (13 in. lg)
8673357
LINE, distributor to vacuum line tee, assy (26 in. lg)
8677028
LINE, elbow to union, assy.(at dash) (used on vehicles through serial No. 29295) (16 1/2 in. lg)
WO-808926
LINE, fuel tank to elbow, assy (at tank) (used on vehicles after serial No. 22336 and through serial No. 23359) (30 3/4 in. lg)
WO-806428
LINE, master cylinder to union, assy (at dash) (used on vehicles through serial No. 29295) (29 in. lg)

$40.00 plus $10.00 shipping USPS Mail

All lines are about an inch longer than needed to allow for adjustments...
Lines will be coiled as needed for shipping.

I accept PayPal (use my email address), Check or MO; Cash at your own risk... email me and I will provide address...

If interested contact me...

Please contact me by clicking on the email button below... please State type of vehicle and Vent Lines in the subject...

millertime · Post by **millertime** » Sat Feb 19, 2011 8:34 pm

do you use paypal?

OKCM38CDN · Post by **OKCM38CDN** » Sun Feb 20, 2011 7:09 am

Yes...

Send it to my email address...

Please, send me an email prior so that I can be prepared for your order...

I have 3 orders pending and need to order some more materials... I did not expect this big of a rush...

Thanks...

OKCM38CDN · Post by **OKCM38CDN** » Thu Mar 10, 2011 7:01 am

hillbilly21 · Post by **hillbilly21** » Sat Mar 12, 2011 8:45 am

Money sent ..Thanks again Hal...

ZeroGs · Post by **ZeroGs** » Tue Mar 15, 2011 12:07 am

The should be installed during next few months. They look great. Thank you again.

I am glad to know you are back at it.

OKCM38CDN · Post by **OKCM38CDN** » Sun Mar 20, 2011 5:29 pm

Gents, I have edited my posting... I have had to raise the cost of shipping from this point on. All new orders will cost $10 for shipping... Priority Mail has gone up drasticly and so I have made an adjustment...

Sorry for the increase...

hillbilly21 · Post by **hillbilly21** » Sun Mar 27, 2011 8:33 am

GOT MINE AGAIN THANKS !!!!!!!!!

OKCM38CDN · Post by **OKCM38CDN** » Fri Jul 01, 2011 5:39 pm

pickle · Post by **pickle** » Sun Jul 03, 2011 7:40 am

Hello:

What lines do you still have left? I am interested only in M38 (as per below):

M-38 3/16" Copper vent lines with tube nuts and loom assembled and ready to install as per the SNL G-740; consisting of 3 lines:

8676980
TUBE, IGNITOR VENT, assy (9")
8676981
TUBE, IGNITOR VENT TO WIPER, assy (27")
8676982 TUBE, gas tank vent, assy (86")

are you making them, or are they NOS?

OKCM38CDN · Post by **OKCM38CDN** » Sun Jul 03, 2011 1:27 pm

All vent lines are made to order, so if you want a set let me know the type of vehicle and I make them...

Thanks

whydahdvr · Post by **whydahdvr** » Fri Oct 21, 2011 8:25 am

Are you still making the vent lines?
Thanks.

OKCM38CDN · Post by **OKCM38CDN** » Fri Oct 21, 2011 7:22 pm

Yes, just send me an email with what you need...

OKCM38CDN · Post by **OKCM38CDN** » Tue Jun 19, 2012 4:04 pm

henrydes · Post by **henrydes** » Wed Jun 27, 2012 3:14 pm

Great job and cheaper than I could make them for...Thanks

willysmjeeps.com

M-38 / M-38A1 Copper Vent Lines...

M-38 / M-38A1 Copper Vent Lines...

$$$$$$

Received 2 sets. Nice work. Thank you

lines

distributor vent lines