I've spent like 5 hours a day, for the last 3 days

Deadguy · Post by **Deadguy** » Thu Oct 27, 2011 7:41 pm

just putting on the "full winter enclosure" from Beechwood canvas. Way more complex than the civilian version! It doesn't help either that I'm missing parts. The door/side curtain rod cups (those little things mounted on the body sidewall that the tip of the rod rests in), foot man loops, and rope track (for the doors). Or that none of the holes for the footman loops are even there, and I've broken two drill bits hollowing them out! Next up is the in cab heater and turn signal upgrade, I'm that will be an ordeal as well! The heater I have the military instruction manual for, but the turn signal upgrade, I only have what I printed out from Wes's online files. Better than no instructions, but there is alot I'm still trying to figure out.

Post by **wesk** » Thu Oct 27, 2011 8:51 pm

Early military, late military or civvy turn signala?

Deadguy · Post by **Deadguy** » Thu Oct 27, 2011 10:18 pm

1952 M38A1. The turn signal kit is a 1954 military issue for "M series vehicles".

Post by **wesk** » Fri Oct 28, 2011 9:42 am

If this is the system then the complete MWO for it's installation is here. All you need to install it is in the MWO and the Wiring Diagram.
http://www.willysmjeeps.com/v2/modules. ... _album.php

Luis · Post by **Luis** » Mon Jan 23, 2012 5:57 pm

Hi Wes!
Interesting information!
A friend is looking to install turn signals on a M606 Jeep.
I can use and reproduce these images in other Spanish-speaking forum????

Thanks in advance!

Post by **wesk** » Tue Jan 24, 2012 5:09 pm

Yes, Luis, they are not copyrighted.
Copy what you need from my photo album:
http://www.willysmjeeps.com/v2/modules. ... _album.php

Luis · Post by **Luis** » Tue Jan 24, 2012 5:20 pm

Thank you very very much Wes!!

Cheers!