I ordered seat covers from Surplus City and decided to get a Jerry Can strap while I was at it.
They sent me one strap which I think is incorrect. I called Surplus City and the guy says they used the single strap setup at some point.
I personally don't care too much about originality but is this information true and how to you attach the one piece strap? He said is uses the backside slot on the Jerry Can holder and not the facing towards the back of the Jeep.
Thanks for the help.
One piece Jerry Can strap?
- 53a1
- Jeep Enthusiast

- Posts: 586
- Joined: Tue Jun 24, 2008 6:00 pm
- Location: Kern Co.
One piece Jerry Can strap?
'53 M38A1 X2
-
skyjeep50
- Jeep Enthusiast

- Posts: 606
- Joined: Mon Feb 19, 2007 6:00 pm
- Location: Illinois
- wesk
- Site Administrator

- Posts: 16468
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
A problem with one piece is the can will usually rattle in the can holder. The two piece firmly fixes the can relative to both the can carrier and the rear of the tub or tailgate.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
- Kendall
- Jeep Enthusiast

- Posts: 351
- Joined: Fri Feb 24, 2006 6:00 pm
- Location: Wichita, KS
- 53a1
- Jeep Enthusiast

- Posts: 586
- Joined: Tue Jun 24, 2008 6:00 pm
- Location: Kern Co.
I figured out a good way to secure the can using a 4' strap. I fed the flat end of the strap through the footman loop for the can strap and down and up through the front (next to tub) slot on the jerry can holder, up and around the can handle. It is real tight and I couldn't pull or move the can out of the holder. I'm real happy with this setup and I'll post a picture tonight.
Thanks again for your input.
Thanks again for your input.
'53 M38A1 X2
- wilfreeman
- Jeep Legend

- Posts: 1079
- Joined: Sun Mar 12, 2006 6:00 pm
- Location: Richburg, SC
- Contact:
Did you ever get a pic of your setup?
Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
- 53a1
- Jeep Enthusiast

- Posts: 586
- Joined: Tue Jun 24, 2008 6:00 pm
- Location: Kern Co.
- wilfreeman
- Jeep Legend

- Posts: 1079
- Joined: Sun Mar 12, 2006 6:00 pm
- Location: Richburg, SC
- Contact:
Interesting - where did you find the strap? Thanks for the pic!
Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
- 53a1
- Jeep Enthusiast

- Posts: 586
- Joined: Tue Jun 24, 2008 6:00 pm
- Location: Kern Co.
- wilfreeman
- Jeep Legend

- Posts: 1079
- Joined: Sun Mar 12, 2006 6:00 pm
- Location: Richburg, SC
- Contact:
I'm sure there were a lot of jeeps in the field that used whatever they had to
Matt
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
1953 M38a1
1964 USMC M38a1
'51 USMC M100 trailer, '54 M100 trailer, '90 M101a1 trailer
Http://wilfreeman.wordpress.com (M38a1 build blog)
http://m38a1usmc.wordpress.com (USMC M38a1 rebuild blog)
