The bolt hole way out front had a signal light it it...removed now the other three are longer and wider than a Black out driving light as the other side has?
Thanks! HC!
Right fender bolt pattern question M38A1 1953 CDN1
-
Headcase
- Member
- Posts: 33
- Joined: Fri Sep 30, 2011 6:00 pm
- Location: Burnaby BC Canada
Right fender bolt pattern question M38A1 1953 CDN1
Can anyone say for sure or even a maybe what these bolt holes were for?
The bolt hole way out front had a signal light it it...removed now the other three are longer and wider than a Black out driving light as the other side has?
Thanks! HC!
The bolt hole way out front had a signal light it it...removed now the other three are longer and wider than a Black out driving light as the other side has?
Thanks! HC!
-
ChiGuy82
- Member
- Posts: 41
- Joined: Sat May 02, 2009 6:00 pm
-
Headcase
- Member
- Posts: 33
- Joined: Fri Sep 30, 2011 6:00 pm
- Location: Burnaby BC Canada
I found out what it is for...!
An ATU Mount for a radio tuner and antenna. It sits way out in front of the headlight ina a small box on the plate with an antenna mounted on top.
It is a very good example of how the Army will mount something very utilitarian.
These are pics from a friends Jeep with the same fender bolt pattern and year.
An ATU Mount for a radio tuner and antenna. It sits way out in front of the headlight ina a small box on the plate with an antenna mounted on top.
It is a very good example of how the Army will mount something very utilitarian.
These are pics from a friends Jeep with the same fender bolt pattern and year.